AutoCodes - Cadillac - P02EB CADILLAC

P02EB CADILLAC Code - Intake Air Flow Valve Control Motor Current Performance

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
Table of contents

|P02EB CADILLAC code possible causes

  • Faulty Throttle Body Assembly
  • Throttle Body Assembly harness is open or shorted
  • Throttle Body Assembly circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

|How do I fix the P02EB CADILLAC code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|Cost of diagnosing the P02EB CADILLAC code

Labor: 1.0

The cost of diagnosing the P02EB CADILLAC code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|What are P02EB CADILLAC code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|P02EB CADILLAC code description

The intake airflow valve of diesel engines reduces the intake air flow rate in part-load operation so that a higher exhaust gas recirculation rate can be achieved.
The Intake airflow valve assembly contains a contactless inductive throttle position sensing element that is managed by a customized integrated circuit. The valve position sensor is mounted within the valve body assembly and is not serviceable. The Engine Control Module (ECM) supplies the valve body with a 5 V reference circuit, a low reference circuit, an H-bridge motor directional control circuit, and an asynchronous signal/serial data circuit. The asynchronous signal means communication is only going from the intake airflow valve to the ECM. The Intake Air Flow Valve cannot receive data from the ECM over the signal/serial data circuit. The valve position sensor provides a signal voltage that changes relative to the valve blade angle. The valve position sensor information is transmitted between the Intake Air Flow Valve and the ECM on the signal/serial data circuit.
The valve may also be used to shut down the engine by closing the intake airflow valve and disabling the fuel injectors if the control module detects the engine speed is beyond the desired control limits. The Diagnostic Trouble Code (DTC) will be set if the ECM detects a high current through the throttle motor.
OBDII Code P02eb Cadillac - Intake Air Flow Valve Control Motor Current Performance - AutoCodes.com

|Need more information with the P02EB CADILLAC code?

Need more information on how to fix the P02EB CADILLAC code? Get Access to Factory Service Manuals

|Need help with a P02EB CADILLAC code?

Get the P02eb Cadillac code diagnosed by a professional: Find a repair shop in your area

|P02EB CADILLAC code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P02eb Cadillac code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 3
 
1=Easy 2=Moderate 3=Hard What is this?