P02EB 2014 GMC Sierra Code - Intake Air Flow Valve Control Motor Current Performance
Quick Answer
The intake airflow valve of diesel engines reduces the intake air flow rate in part-load operation so that a higher exhaust gas recirculation rate can be achieved. Common causes include Faulty Throttle Body Assembly, Throttle Body Assembly harness is open or shorted, Throttle Body Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P02EB 2014 GMC Sierra indicates Intake Air Flow Valve Control Motor Current Performance.
- Common causes
- Common causes include Faulty Throttle Body Assembly, Throttle Body Assembly harness is open or shorted, Throttle Body Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P02EB 2014 GMC Sierra Description
The Intake airflow valve assembly contains a contactless inductive throttle position sensing element that is managed by a customized integrated circuit. The valve position sensor is mounted within the valve body assembly and is not serviceable. The Engine Control Module (ECM) supplies the valve body with a 5 V reference circuit, a low reference circuit, an H-bridge motor directional control circuit, and an asynchronous signal/serial data circuit. The asynchronous signal means communication is only going from the intake airflow valve to the ECM. The Intake Air Flow Valve cannot receive data from the ECM over the signal/serial data circuit. The valve position sensor provides a signal voltage that changes relative to the valve blade angle. The valve position sensor information is transmitted between the Intake Air Flow Valve and the ECM on the signal/serial data circuit.
The valve may also be used to shut down the engine by closing the intake airflow valve and disabling the fuel injectors if the control module detects the engine speed is beyond the desired control limits. The Diagnostic Trouble Code (DTC) will be set if the ECM detects a high current through the throttle motor.
What are the Possible Causes of the DTC P02EB 2014 GMC Sierra?
- Faulty Throttle Body Assembly
- Throttle Body Assembly harness is open or shorted
- Throttle Body Assembly circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P02EB 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P02EB 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P02EB 2014 GMC Sierra code?
Need more information on how to fix the P02EB 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P02EB 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P02EB 2014 GMC Sierra Code
1. What does the OBDII code P02EB mean on a 2014 GMC Sierra?
The code P02EB indicates an issue with the intake air flow valve control motor's performance, specifically the current draw or operation being outside of the expected range.
2. What are the common symptoms of code P02EB in a 2014 GMC Sierra?
Symptoms may include reduced engine performance, poor acceleration, rough idling, and potentially an illuminated check engine light.
3. What causes the P02EB code to appear?
Common causes include a faulty intake air flow valve control motor, poor electrical connections, wiring issues, or a malfunctioning powertrain control module (PCM).
4. Can I drive my 2014 GMC Sierra with the P02EB code?
While the vehicle may still be drivable, it is not recommended to ignore the issue, as it can lead to reduced performance and potential long-term engine damage.
5. How do I diagnose the P02EB code on my GMC Sierra?
Diagnosis involves using an OBDII scanner to confirm the code, inspecting the intake air flow valve and control motor, checking for damaged wiring or connectors, and testing the motor's voltage and resistance.
6. How can I fix the P02EB code on my 2014 GMC Sierra?
Repairs may include replacing the intake air flow valve control motor, repairing or replacing damaged wiring or connectors, or reprogramming the PCM if necessary.
7. What tools are needed to address the P02EB code?
You’ll need an OBDII scanner, a multimeter for electrical testing, and basic hand tools to inspect and replace components.
8. How much does it cost to fix the P02EB code?
Repair costs can vary but typically range from $150 to $500, depending on whether the intake air flow valve motor or wiring needs replacement.
9. Can a dirty air filter cause the P02EB code?
A dirty air filter is unlikely to directly cause the P02EB code, but it can contribute to air flow issues that may exacerbate related problems.
10. Does the intake air flow valve control motor require regular maintenance?
The motor itself doesn’t require regular maintenance, but keeping the intake system clean and inspecting electrical connections periodically can help prevent issues.
Discuss the causes and fixes for P02EB 2014 GMC Sierra OBDII Code
Code P02EB 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
