P02EB 2014 Chevrolet Silverado Code - Intake Air Flow Valve Control Motor Current Performance
Quick Answer
The intake airflow valve of diesel engines reduces the intake air flow rate in part-load operation so that a higher exhaust gas recirculation rate can be achieved. Common causes include Faulty Throttle Body Assembly, Throttle Body Assembly harness is open or shorted, Throttle Body Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P02EB 2014 Chevrolet Silverado indicates Intake Air Flow Valve Control Motor Current Performance.
- Common causes
- Common causes include Faulty Throttle Body Assembly, Throttle Body Assembly harness is open or shorted, Throttle Body Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P02EB 2014 Chevrolet Silverado Description
The Intake airflow valve assembly contains a contactless inductive throttle position sensing element that is managed by a customized integrated circuit. The valve position sensor is mounted within the valve body assembly and is not serviceable. The Engine Control Module (ECM) supplies the valve body with a 5 V reference circuit, a low reference circuit, an H-bridge motor directional control circuit, and an asynchronous signal/serial data circuit. The asynchronous signal means communication is only going from the intake airflow valve to the ECM. The Intake Air Flow Valve cannot receive data from the ECM over the signal/serial data circuit. The valve position sensor provides a signal voltage that changes relative to the valve blade angle. The valve position sensor information is transmitted between the Intake Air Flow Valve and the ECM on the signal/serial data circuit.
The valve may also be used to shut down the engine by closing the intake airflow valve and disabling the fuel injectors if the control module detects the engine speed is beyond the desired control limits. The Diagnostic Trouble Code (DTC) will be set if the ECM detects a high current through the throttle motor.
What are the Possible Causes of the DTC P02EB 2014 Chevrolet Silverado?
- Faulty Throttle Body Assembly
- Throttle Body Assembly harness is open or shorted
- Throttle Body Assembly circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P02EB 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P02EB 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P02EB 2014 Chevrolet Silverado code?
Need more information on how to fix the P02EB 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P02EB 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P02EB 2014 Chevrolet Silverado Code
What does the OBDII code P02EB mean on a 2014 Chevrolet Silverado?
The P02EB code indicates an issue with the intake air flow valve control motor's performance, specifically its current draw or operation.
What are the common symptoms of the P02EB code?
Symptoms may include reduced engine performance, a check engine light, poor fuel efficiency, and occasional rough idling.
What causes the P02EB code to appear?
Common causes include a faulty intake air flow valve control motor, wiring or connector issues, or a malfunctioning powertrain control module (PCM).
How can I diagnose the P02EB code?
Start by inspecting the intake air flow valve control motor, wiring, and connectors for damage or corrosion. Use a multimeter to check for proper voltage and current.
Is it safe to drive with the P02EB code?
While the vehicle may still be drivable, ignoring the code can lead to decreased performance and potential engine damage over time.
How do I fix the P02EB code on my Silverado?
Repairs may include replacing the intake air flow valve control motor, repairing damaged wiring, or reprogramming/updating the PCM if necessary.
Can a dirty air filter trigger the P02EB code?
A dirty air filter is not a direct cause of this code, but restricted airflow may contribute to related performance issues.
How much does it cost to repair the P02EB code?
The repair cost varies but typically ranges from $200 to $500, depending on whether the motor or wiring needs replacement.
Can a software update resolve the P02EB code?
In some cases, a PCM software update can resolve the issue if the problem is related to incorrect programming.
What tools do I need to troubleshoot the P02EB code?
You’ll need an OBDII scanner, a multimeter, and basic hand tools to inspect and test the intake air flow valve control motor and related circuits.
Discuss the causes and fixes for P02EB 2014 Chevrolet Silverado OBDII Code
Code P02EB 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
