P02E8 2018 GMC Sierra Code - Diesel Intake Air Flow Position Sensor Circuit Low
Quick Answer
The Throttle Body Assembly contains a contact-less inductive throttle position sensing element that is managed by a customized integrated circuit. Common causes include Faulty Throttle Body Assembly, Throttle Body Assembly harness is open or shorted, Throttle Body Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P02E8 2018 GMC Sierra indicates Diesel Intake Air Flow Position Sensor Circuit Low.
- Common causes
- Common causes include Faulty Throttle Body Assembly, Throttle Body Assembly harness is open or shorted, Throttle Body Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P02E8 2018 GMC Sierra Description
What are the Possible Causes of the DTC P02E8 2018 GMC Sierra?
- Faulty Throttle Body Assembly
- Throttle Body Assembly harness is open or shorted
- Throttle Body Assembly circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P02E8 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P02E8 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P02E8 2018 GMC Sierra code?
Need more information on how to fix the P02E8 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P02E8 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P02E8 2018 GMC Sierra Code
What does the OBDII code P02E8 mean on a 2018 GMC Sierra?
The code P02E8 indicates a "Diesel Intake Air Flow Position Sensor Circuit Low," meaning the sensor is detecting lower than expected voltage in the intake air flow system.
What are the common symptoms of the P02E8 code on a GMC Sierra?
Symptoms may include poor engine performance, reduced fuel efficiency, difficulty starting, rough idling, or an illuminated check engine light.
What causes the P02E8 code to appear in a 2018 GMC Sierra?
The most common causes include a faulty intake air flow position sensor, damaged wiring or connectors, a malfunctioning ECM, or dirt/debris obstructing the sensor.
Can I drive my 2018 GMC Sierra with a P02E8 code?
Driving with this code is not recommended, as it may lead to reduced engine performance and potential damage to the diesel intake system over time.
How do I diagnose the P02E8 code on a 2018 GMC Sierra?
Start by checking the wiring and connectors to the intake air flow position sensor for damage or corrosion. Then, test the sensor itself for proper voltage and function using a multimeter.
How do I fix the P02E8 code on my GMC Sierra?
Repairs may include replacing the intake air flow position sensor, repairing or replacing damaged wiring, cleaning the sensor, or reprogramming the ECM if needed.
What tools are needed to repair a P02E8 code?
Basic tools include a diagnostic scanner, a multimeter for electrical testing, and possibly a socket set or screwdriver to remove and replace the sensor.
Does the P02E8 code require sensor replacement?
Not always. First, inspect for loose or corroded connections, and clean the sensor. If the issue persists, replacing the sensor may be necessary.
Can a clogged air filter cause the P02E8 code on a 2018 GMC Sierra?
While unlikely, a severely clogged air filter can restrict airflow and indirectly affect readings, so it’s worth checking the filter as part of the diagnosis.
Will clearing the P02E8 code fix the issue on my GMC Sierra?
Clearing the code may temporarily turn off the check engine light, but it won’t resolve the underlying issue causing the code. Proper diagnosis and repair are required.
Discuss the causes and fixes for P02E8 2018 GMC Sierra OBDII Code
Code P02E8 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
