P02E0 BUICK Code - Intake Air Flow Valve Control Circuit
|P02E0 BUICK code possible causes
- Faulty Throttle Body Assembly
- Throttle Body Assembly harness is open or shorted
- Throttle Body Assembly circuit poor electrical connection
- Faulty Engine Control Module (ECM)
|How do I fix the P02E0 BUICK code?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|Cost of diagnosing the P02E0 BUICK code
Labor: 1.0The cost of diagnosing the P02E0 BUICK code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are P02E0 BUICK code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|P02E0 BUICK code descriptionThe intake airflow valve of diesel engines reduces the intake air flow rate in part-load operation so that a higher exhaust gas recirculation rate can be achieved.
The Intake airflow valve assembly contains a contactless inductive throttle position sensing element that is managed by a customized integrated circuit. The valve position sensor is mounted within the valve body assembly and is not serviceable. The Engine Control Module (ECM) supplies the valve body with a 5 V reference circuit, a low reference circuit, an H-bridge motor directional control circuit, and an asynchronous signal/serial data circuit. The asynchronous signal means communication is only going from the intake airflow valve to the ECM. The Intake Air Flow Valve cannot receive data from the ECM over the signal/serial data circuit. The valve position sensor provides a signal voltage that changes relative to the valve blade angle. The valve position sensor information is transmitted between the Intake Air Flow Valve and the ECM on the signal/serial data circuit.
The valve may also be used to shut down the engine by closing the intake airflow valve and disabling the fuel injectors if the control module detects the engine speed is beyond the desired control limits. The Diagnostic Trouble Code (DTC) will be set if the ECM detects an open circuit condition of the intake airflow valve control circuit.
|Need more information with the P02E0 BUICK code?Need more information on how to fix the P02E0 BUICK code? Get Access to Factory Service Manuals
|Need help with a P02E0 BUICK code?Get the P02e0 Buick code diagnosed by a professional: Find a repair shop in your area
|P02E0 BUICK code commentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P02e0 Buick code? Have you replaced any parts?
Any information is appreciated. Thanks