AutoCodes – Generic – P02D6

P02D6 Code - Cylinder 6 Fuel Injector Offset Learning At Min Limit

Quick Answer

Zero Fuel Calibration (ZFC) is an algorithm used to detect deviations in individual injector performance from nominal. Common causes include Faulty Cylinder 6 Fuel Injector, Cylinder 6 Fuel Injector harness is open or shorted, Cylinder 6 Fuel Injector circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P02D6 indicates Cylinder 6 Fuel Injector Offset Learning At Min Limit.
Common causes: Common causes include Faulty Cylinder 6 Fuel Injector, Cylinder 6 Fuel Injector harness is open or shorted, Cylinder 6 Fuel Injector circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,453

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 09, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P02D6 Description

Zero Fuel Calibration (ZFC) is an algorithm used to detect deviations in individual injector performance from nominal. In an overrun/decel fuel shut-off condition, fuel rail pressure is set to 300 bar and small injections are made from a single injector. The observed acceleration in crankshaft speed is detected and compared to the expected acceleration. If the observed acceleration deviates from the expected acceleration by more than 50%, then an additional routine is called adjusts the injection energizing time until observed acceleration matches expected. This information is then used to adjust all pilot injections on that injector to ensure correct fuel delivery. If the absolute energizing time observed for the test injection to yield the expected acceleration exceeds minimum or maximum limits, a code is set.
The Powertrain Control Module (PCM) sets the OBDII code when the observed energizing time for the test injection is 156 us or more lower than the target 430 us energizing time for the given injector.

OBDII Code P02D6 - Cylinder 6 Fuel Injector Offset Learning At Min Limit - AutoCodes.com — P02D6 Code - Cylinder 6 Fuel Injector Offset Learning At Min Limit

What does this mean?

What are the Possible Causes of the DTC P02D6?

Faulty Cylinder 6 Fuel Injector
Cylinder 6 Fuel Injector harness is open or shorted
Cylinder 6 Fuel Injector circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P02D6?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P02D6 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P02D6 code?

Need more information on how to fix the P02D6 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P02D6 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P02D6 BMW — Cylinder 6 Fuel Injector Offset Learning At Min Limit
P02D6 Chevrolet — Cylinder 6 Injector Exceeded Minimum Learning Limit
P02D6 Ford — Cylinder 6 Fuel Injector Offset Learning At Min Limit
P02D6 GMC — Cylinder 6 Injector Exceeded Minimum Learning Limit

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.