P02CF BMW - Cylinder 2 Fuel Injector Offset Learning At Max Limit

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

Possible causes

  • Faulty Cylinder 2 Fuel Injector
  • Cylinder 2 Fuel Injector harness is open or shorted
  • Cylinder 2 Fuel Injector circuit poor electrical connection
  • Faulty Powertrain Control Module (PCM)

Possible symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P02cf Bmw Description

Zero Fuel Calibration (ZFC) is an algorithm used to detect deviations in individual injector performance from nominal. In an overrun/decel fuel shut-off condition, fuel rail pressure is set to 300 bar and small injections are made from a single injector. The observed acceleration in crankshaft speed is detected and compared to the expected acceleration. If the observed acceleration deviates from the expected acceleration by more than 50%, then an additional routine is called adjusts the injection energizing time until observed acceleration matches expected. This information is then used to adjust all pilot injections on that injector to ensure correct fuel delivery. If the absolute energizing time observed for the test injection to yield the expected acceleration exceeds minimum or maximum limits, a code is set.

The Powertrain Control Module (PCM) sets the OBDII code when the observed energizing time for the test injection is 254 us or more higher than the target 430 us energizing time for the given injector.

OBDII Code P02cf Bmw - Cylinder 2 Fuel Injector Offset Learning At Max Limit - AutoCodes.com

Need more help?

Get the P02cf Bmw code diagnosed by a professional: Find a repair shop in your area

Related Information

P02CF BMW Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P02cf Bmw code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧