P0298 2000 FORD F150 - Engine Oil Over Temperature Condition
- Engine overheating condition
- Very high engine RPM for an extended period of time
- Low or dirty motor oil condition
- Faulty Oil Pressure Switch
- Faulty Engine Oil Temperature (EOT) sensor
Tech notesIndicates the Engine Oil Temperature Protection strategy in the PCM has been activated. This will temporarily prohibit high engine speed operation by disabling injectors, therefore reducing the risk of engine damage from high engine oil temperature. Note: On engines which are equipped with an oil temperature sensor, the PCM reads oil temperature to determine if it is excessive. When an oil temperature sensor is not present, the PCM uses an oil algorithm to infer actual temperature. Engine shutdown strategy function is the same on vehicles with and without oil temperature sensors.
When is the code detected?P0298 is set when the vehicle has been running below 1,000 rpm and less than 20 mg/stroke MFDES with EOT sensor signal reading above 110 C (230 F). The time to set the fault is dependent on EOT and Intake Air Temperature (IAT) temperatures, and can vary between approx. 15 to 45 minutes
- Engine Light ON (or Service Engine Soon Warning Light)
P0298 2000 Ford F150 DescriptionIndicates the Engine Oil Temperature Protection (EOT) strategy in the Engine Control Module (ECM) has been activated. This temporarily prohibits high engine speed operation by disabling injectors, reducing the risk of engine damage from high engine oil temperature.
Need more help?Get the P0298 2000 Ford F150 code diagnosed by a professional: Find a repair shop in your area
P0298 2000 FORD F150 CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0298 2000 Ford F150 code? Have you replaced any parts?
Any information is appreciated. Thanks