AutoCodes – Ford – P0297 2010 Ford Fusion

P0297 2010 Ford Fusion Code - Vehicle Over-Speed Condition

Quick Answer

Indicates the vehicle has been operated in a manner which caused the vehicle speed to exceed a calibration limit. Common causes include Vehicle driven at a high rate of speed. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0297 2010 Ford Fusion indicates Vehicle Over-Speed Condition.
Common causes: Common causes include Vehicle driven at a high rate of speed.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,637

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 14, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0297 2010 Ford Fusion Description

Indicates the vehicle has been operated in a manner which caused the vehicle speed to exceed a calibration limit. The vehicle speed is continuously monitored and evaluated by the Power Train Control Module (PCM. The DTC is set when the vehicle speed exceed the calibrated limit set within the PCM.

OBDII Code P0297 2010 Ford Fusion - Vehicle Over-Speed Condition - AutoCodes.com — P0297 2010 Ford Fusion Code - Vehicle Over-Speed Condition

What does this mean?

What are the Possible Causes of the DTC P0297 2010 Ford Fusion?

Vehicle driven at a high rate of speed.

How to Fix the DTC P0297 2010 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Try to reset the code first and see if it comes back.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0297 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0297 2010 Ford Fusion code?

Need more information on how to fix the P0297 2010 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0297 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0297 2010 Ford Fusion Code

1. What is OBDII code P0297 on a 2010 Ford Fusion?

- OBDII code P0297 refers to a "Vehicle Over-Speed Condition" detected by the vehicle's control module.

2. What are the common symptoms of OBDII code P0297 in a 2010 Ford Fusion?

- Common symptoms include the vehicle going into a reduced power mode, a Check Engine Light illuminating, and decreased engine performance.

3. What causes the OBDII code P0297 to trigger in a 2010 Ford Fusion?

- The code is typically triggered by a discrepancy between the vehicle speed signal and the engine speed signal, indicating a potential over-speed condition.

4. How can I diagnose the OBDII code P0297 on my 2010 Ford Fusion?

- Diagnosing this code may involve checking the vehicle speed sensor, engine speed sensor, wiring connections, and the control module for any faults.

5. Can a faulty vehicle speed sensor cause the OBDII code P0297 in a 2010 Ford Fusion?

- Yes, a faulty vehicle speed sensor can lead to the OBDII code P0297 triggering due to incorrect speed readings.

6. How can I reset the OBDII code P0297 on my 2010 Ford Fusion?

- Resetting the code often involves using an OBDII scanner to clear the code after addressing the underlying issue that caused it.

7. Is it safe to drive my 2010 Ford Fusion with the OBDII code P0297 active?

- It is not recommended to drive the vehicle with the code active as it may result in reduced engine performance and potential safety hazards.

8. Can a simple sensor calibration fix the OBDII code P0297 in a 2010 Ford Fusion?

- In some cases, recalibrating the vehicle speed sensor or engine speed sensor may resolve the issue triggering the code.

9. Are there any DIY repair tips for addressing the OBDII code P0297 in a 2010 Ford Fusion?

- DIY repair tips may include checking and cleaning sensor connections, inspecting wiring for damages, and ensuring proper sensor operation.

10. Should I seek professional help to address the OBDII code P0297 in my 2010 Ford Fusion?

- If DIY methods do not resolve the issue causing the code, it is recommended to seek professional help to accurately diagnose and repair the problem.