AutoCodes – Ford – P0297 2008 Ford Fusion

P0297 2008 Ford Fusion Code - Vehicle Over-Speed Condition

Quick Answer

Indicates the vehicle has been operated in a manner which caused the vehicle speed to exceed a calibration limit. Common causes include Vehicle driven at a high rate of speed. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0297 2008 Ford Fusion indicates Vehicle Over-Speed Condition.
Common causes: Common causes include Vehicle driven at a high rate of speed.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,000

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 14, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0297 2008 Ford Fusion Description

Indicates the vehicle has been operated in a manner which caused the vehicle speed to exceed a calibration limit. The vehicle speed is continuously monitored and evaluated by the Power Train Control Module (PCM. The DTC is set when the vehicle speed exceed the calibrated limit set within the PCM.

OBDII Code P0297 2008 Ford Fusion - Vehicle Over-Speed Condition - AutoCodes.com — P0297 2008 Ford Fusion Code - Vehicle Over-Speed Condition

What does this mean?

What are the Possible Causes of the DTC P0297 2008 Ford Fusion?

Vehicle driven at a high rate of speed.

How to Fix the DTC P0297 2008 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Try to reset the code first and see if it comes back.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0297 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0297 2008 Ford Fusion code?

Need more information on how to fix the P0297 2008 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0297 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0297 2008 Ford Fusion Code

1. What does the OBDII code P0297 on a 2008 Ford Fusion indicate?

The code P0297 on a 2008 Ford Fusion suggests a Vehicle Over-Speed Condition, which means the vehicle is exceeding the speed limit set by the manufacturer.

2. What are the common symptoms of the P0297 code in a 2008 Ford Fusion?

Common symptoms of the P0297 code in a 2008 Ford Fusion may include the vehicle entering a reduced power mode, the Check Engine Light illuminating, and a noticeable decrease in engine performance.

3. What are the possible causes of the P0297 code on a 2008 Ford Fusion?

Potential causes of the P0297 code on a 2008 Ford Fusion include a faulty transmission speed sensor, issues with the vehicle speed sensor circuit, or a malfunctioning Engine Control Module (ECM).

4. How can I diagnose the P0297 code on my 2008 Ford Fusion?

To diagnose the P0297 code on a 2008 Ford Fusion, you can use an OBDII scanner to retrieve the trouble codes, inspect the vehicle speed sensor and related wiring, and perform a thorough visual inspection of the transmission system.

5. Can I still drive my 2008 Ford Fusion with the P0297 code present?

It is not recommended to drive your 2008 Ford Fusion with the P0297 code active, as it may lead to further damage to the transmission or engine components. It is best to address the issue promptly.

6. How can I repair the P0297 code on my 2008 Ford Fusion?

Repairing the P0297 code on a 2008 Ford Fusion may involve replacing a faulty vehicle speed sensor, repairing damaged wiring, or reprogramming the ECM. It is advisable to consult a professional mechanic for accurate diagnosis and repair.

7. Will resetting the trouble codes make the P0297 code disappear on my 2008 Ford Fusion?

Resetting the trouble codes may temporarily clear the P0297 code on your 2008 Ford Fusion, but if the underlying issue is not addressed, the code is likely to reappear. It is essential to diagnose and repair the root cause of the problem.

8. Can a DIY enthusiast fix the P0297 code on a 2008 Ford Fusion?

While some aspects of diagnosing and repairing the P0297 code may be within reach of a skilled DIY enthusiast, it is recommended to seek professional help for accurate diagnosis and repair to ensure the issue is resolved effectively.

9. How much does it cost to fix the P0297 code on a 2008 Ford Fusion?

The cost of fixing the P0297 code on a 2008 Ford Fusion can vary depending on the exact cause of the issue, parts needed for repair, and labor costs. It is advisable to obtain quotes from different mechanics for an accurate estimate.

10. Is the P0297 code a common issue in 2008 Ford Fusion vehicles?

The P0297 code indicating a Vehicle Over-Speed Condition is not a common issue in 2008 Ford Fusion vehicles. If you encounter this code, it is essential to address it promptly to prevent further damage to the vehicle's components.