AutoCodesMercury – P0282 Mercury

P0282 Mercury Code - Cylinder 8 Injector Circuit Low

Quick Answer

The Engine Control Module (ECM) supplies voltage to each Fuel Injector on the high control circuits. Common causes include Dirty Fuel Injector 8, Faulty Fuel Injector 8, Plugged Fuel Injector 8. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0282 Mercury indicates Cylinder 8 Injector Circuit Low.
Common causes
Common causes include Dirty Fuel Injector 8, Faulty Fuel Injector 8, Plugged Fuel Injector 8.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 238
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 02, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0282 Mercury Description

The Engine Control Module (ECM) supplies voltage to each Fuel Injector on the high control circuits. The ECM energizes each fuel injector by grounding the low control circuit of the fuel injector. The ECM monitors the status of the fuel injector circuits. When a fuel injector circuit condition is detected by the ECM, the affected fuel injector(s) is disabled. The Diagnostic Trouble Code (DTC) will be set when the ECM detects the fuel injector control circuit is shorted to ground for greater than 2 s.
OBDII Code P0282 Mercury - Cylinder 8 Injector Circuit Low - AutoCodes.com
P0282 Mercury Code - Cylinder 8 Injector Circuit Low

What are the Possible Causes of the DTC P0282 Mercury?

  • Dirty Fuel Injector 8
  • Faulty Fuel Injector 8
  • Plugged Fuel Injector 8
  • Fuel injector 8 harness is open or shorted
  • Fuel injector 8 circuit poor electrical connection

How to Fix the DTC P0282 Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0282 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0282 Mercury code?

Need more information on how to fix the P0282 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0282 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0282 Mercury Code

1. What does the OBDII code P0282 mean on a Mercury vehicle?

P0282 indicates a "Cylinder 8 Injector Circuit Low," meaning the fuel injector for cylinder 8 is not receiving the proper electrical voltage or current.

2. What are the common symptoms of a P0282 code in a Mercury?

Symptoms may include rough idling, reduced engine performance, misfires, poor fuel economy, and the Check Engine Light turning on.

3. What causes the P0282 code to appear in a Mercury?

Common causes include a faulty fuel injector, damaged wiring or connectors, a malfunctioning Engine Control Module (ECM), or a poor electrical connection in the injector circuit.

4. Can I drive my Mercury with a P0282 code?

Driving with a P0282 code is not recommended, as it can lead to poor engine performance, increased fuel consumption, and potential engine damage over time.

5. How do I diagnose the P0282 code in my Mercury?

Diagnosis typically involves inspecting the injector wiring and connectors, testing the fuel injector's resistance, and using a multimeter to check for proper voltage and continuity in the circuit.

6. How can I fix a P0282 code on a Mercury?

Repairs may include replacing a faulty injector, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the ECM if necessary.

7. What tools are needed to troubleshoot a P0282 code?

You’ll need an OBDII scanner, a digital multimeter, and possibly a fuel injector tester to diagnose and repair the issue.

8. How much does it cost to fix the P0282 code on a Mercury?

Repair costs can range from $100 to $500 or more, depending on whether the issue is with the injector, wiring, or ECM.

9. Can a clogged fuel injector cause the P0282 code?

Yes, a clogged or dirty fuel injector can restrict fuel flow, potentially triggering the P0282 code.

10. Will clearing the P0282 code fix the problem?

Clearing the code may turn off the Check Engine Light temporarily, but the underlying issue must be resolved to prevent the code from returning.

Discuss the causes and fixes for P0282 Mercury OBDII Code

Code P0282 Mercury comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play