AutoCodes – BMW – P0276 BMW

P0276 BMW Code - Cylinder 6 Fuel Injector Circuit Low

Quick Answer

This fault code is stored in the Engine Control Module (ECM) when the injector control circuit does not behave as expected. Common causes include Dirty Fuel Injector 6, Faulty Fuel Injector 6, Plugged Fuel Injector 6. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0276 BMW indicates Cylinder 6 Fuel Injector Circuit Low.
Common causes: Common causes include Dirty Fuel Injector 6, Faulty Fuel Injector 6, Plugged Fuel Injector 6.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 10,267

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 02, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0276 BMW Description

This fault code is stored in the Engine Control Module (ECM) when the injector control circuit does not behave as expected. The ECM uses the induced voltage from the injector to indicate that the fuel injector circuit is operating correctly electrically. It does not signal the mechanical condition of the injector. When the ECM opens the ground circuit for an injector, to cease current flow, a voltage is induced into the winding. This voltage shows the electrical integrity of the injector and associated wiring. Absence of this induced voltage results in a fault code being stored in the ECM.

OBDII Code P0276 BMW - Cylinder 6 Fuel Injector Circuit Low - AutoCodes.com — P0276 BMW Code - Cylinder 6 Fuel Injector Circuit Low

What does this mean?

What are the Possible Causes of the DTC P0276 BMW?

Dirty Fuel Injector 6
Faulty Fuel Injector 6
Plugged Fuel Injector 6
Fuel injector 6 harness is open or shorted
Fuel injector 6 circuit poor electrical connection

How to Fix the DTC P0276 BMW?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Clogged or partially clogged fuel injector can cause this code. Start by performing an injector flush before replacing the injector.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0276 BMW code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0276 BMW code?

Need more information on how to fix the P0276 BMW code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0276 BMW code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0276 BMW Code

1. What does the OBDII code P0276 mean on a BMW?

P0276 indicates a problem with the fuel injector circuit for cylinder 6, specifically that the circuit voltage is lower than expected.

2. What are the common symptoms of code P0276 in a BMW?

Symptoms may include rough idling, misfires, reduced engine performance, poor fuel economy, and the Check Engine Light illuminating.

3. What causes the P0276 code in a BMW?

Common causes include a faulty fuel injector, damaged wiring or connectors in the injector circuit, a malfunctioning injector driver in the engine control module (ECM), or poor electrical connections.

4. Can I drive my BMW with a P0276 code?

While the car may be drivable, driving with this code can cause further engine damage, reduced performance, and increased emissions. Itâ€™s best to address the issue promptly.

5. How do I diagnose the P0276 code on my BMW?

Start by checking the wiring and connectors for cylinder 6â€™s fuel injector, testing the injector for proper resistance, and inspecting the ECM for any faults.

6. How do I fix a P0276 code in a BMW?

Repairs may involve replacing the faulty fuel injector, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the ECM if necessary.

7. How much does it cost to repair a P0276 code on a BMW?

Repair costs can vary. Replacing a fuel injector typically costs between $150 and $350, while wiring repairs or ECM replacement can cost more depending on labor rates and parts prices.

8. Can a dirty fuel injector cause the P0276 code in a BMW?

Yes, a clogged or dirty injector can cause the circuit to perform poorly and trigger the code. Cleaning or replacing the injector may resolve the issue.

9. Will a P0276 code cause permanent damage to my BMW engine?

If left unaddressed, it could lead to more severe issues like engine misfires, increased wear on the catalytic converter, and potential long-term engine damage.

10. Can a weak battery cause the P0276 code in a BMW?

While unlikely, a weak or failing battery could affect the electrical system and potentially exacerbate injector circuit issues. Itâ€™s worth testing the battery as part of the diagnostic process.