AutoCodes – Chevrolet – P026C 2017 Chevrolet Silverado

P026C 2017 Chevrolet Silverado Code - Injection Quantity Too Low

Quick Answer

In the calibration/controls community this diagnostic is referred to as the Fuel Setpoint Adaptation (FSA). Common causes include Dirty Air Filter, Air Restrictions, Air Leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P026C 2017 Chevrolet Silverado indicates Injection Quantity Too Low.
Common causes: Common causes include Dirty Air Filter, Air Restrictions, Air Leaks.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 308

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 02, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P026C 2017 Chevrolet Silverado Description

In the calibration/controls community this diagnostic is referred to as the Fuel Setpoint Adaptation (FSA). This algorithm is used to estimate the actual injected fuel quantity. This estimated quantity is used to correct Engine Control Module (ECM) set points for items such as Exhaust Gas Recirculation (EGR), Boost Pressure, Fuel Rail Pressure, etc.. The goal of FSA is to account for injectors that drift during the lifetime of the vehicle. The algorithm estimates the real injected fuel quantity by using input from the Mass Air Flow (MAF) sensor & Nitrogen Oxides (NOx) sensor 1 to determine the air/fuel ratio. If airflow parameters are incorrect due to leaks, blockages, malfunctioning EGR, inaccurate MAF sensor/NOx sensor 1 signals, or fuel injectors that are not performing as intended, a skewed air-fuel ratio could negatively affect the FSA and lead to DTC P026C or P026D. The Diagnostic Trouble Code (DTC) will be set if the Fuel Injection Quantity is less than a predefined threshold for greater than 10 s

OBDII Code P026C 2017 Chevrolet Silverado - Injection Quantity Too Low - AutoCodes.com — P026C 2017 Chevrolet Silverado Code - Injection Quantity Too Low

What does this mean?

What are the Possible Causes of the DTC P026C 2017 Chevrolet Silverado?

Dirty Air Filter
Air Restrictions
Air Leaks
Faulty Fuel Injector
Faulty Nitrogen Oxides (NOx) Sensor
Faulty Mass Air Flow (MAF) Sensor

How to Fix the DTC P026C 2017 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P026C 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P026C 2017 Chevrolet Silverado code?

Need more information on how to fix the P026C 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P026C 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.