AutoCodes – BMW – P0262 BMW

P0262 BMW Code - Cylinder 1 Fuel Injector Circuit High

Quick Answer

This fault code is stored in the Engine Control Module (ECM) when the injector control circuit does not behave as expected. Common causes include Dirty Fuel Injector 1, Faulty Fuel Injector 1, Plugged Fuel Injector 1. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0262 BMW indicates Cylinder 1 Fuel Injector Circuit High.
Common causes: Common causes include Dirty Fuel Injector 1, Faulty Fuel Injector 1, Plugged Fuel Injector 1.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,153

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 02, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0262 BMW Description

This fault code is stored in the Engine Control Module (ECM) when the injector control circuit does not behave as expected. The ECM uses the induced voltage from the injector to indicate that the fuel injector circuit is operating correctly electrically. It does not signal the mechanical condition of the injector. When the ECM opens the ground circuit for an injector, to cease current flow, a voltage is induced into the winding. This voltage shows the electrical integrity of the injector and associated wiring. Absence of this induced voltage results in a fault code being stored in the ECM.

OBDII Code P0262 BMW - Cylinder 1 Fuel Injector Circuit High - AutoCodes.com — P0262 BMW Code - Cylinder 1 Fuel Injector Circuit High

What does this mean?

What are the Possible Causes of the DTC P0262 BMW?

Dirty Fuel Injector 1
Faulty Fuel Injector 1
Plugged Fuel Injector 1
Fuel Injector #1 harness is open or shorted
Fuel Injector #1 circuit poor electrical connection

How to Fix the DTC P0262 BMW?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Clogged or partially clogged fuel injector can cause this code. Start by performing an injector flush before replacing the injector.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0262 BMW code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0262 BMW code?

Need more information on how to fix the P0262 BMW code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0262 BMW code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0262 BMW Code

1. What does OBDII code P0262 mean on a BMW?

P0262 indicates that the fuel injector circuit for cylinder 1 is experiencing a high voltage condition, which may disrupt proper fuel delivery.

2. What are the common symptoms of code P0262 on a BMW?

Symptoms may include rough idling, engine misfires, reduced fuel efficiency, lack of power, or the Check Engine Light turning on.

3. What causes the P0262 code on a BMW?

Common causes include a faulty fuel injector, wiring issues such as corrosion or damage, a malfunctioning ECM (Engine Control Module), or a short in the fuel injector circuit.

4. Can I drive my BMW with a P0262 code?

Itâ€™s not recommended to drive with this code as it can lead to poor engine performance, increased emissions, and potential engine damage over time.

5. How do you diagnose the P0262 code on a BMW?

Diagnosis typically involves inspecting the fuel injector and its wiring, testing the injectorâ€™s resistance, checking for voltage irregularities, and scanning for additional related codes.

6. How do I fix the P0262 code on my BMW?

Repairs may include replacing the faulty fuel injector, repairing or replacing damaged wiring, cleaning corroded connections, or reprogramming/updating the ECM if necessary.

7. How much does it cost to fix a P0262 code on a BMW?

The cost varies depending on the issue but typically ranges from $150 to $500, including parts and labor, with fuel injector replacement being one of the more expensive repairs.

8. Can a dirty fuel injector cause a P0262 code?

While a dirty injector can cause performance issues, a P0262 code specifically points to an electrical issue, such as high voltage in the injector circuit.

9. How can I prevent a P0262 code from occurring?

Regular maintenance, including checking and cleaning fuel injectors, inspecting wiring for damage, and using quality fuel, can help prevent this code.

10. Will clearing the code fix the problem permanently?

No, clearing the code will only reset the Check Engine Light temporarily. The underlying issue must be diagnosed and repaired to prevent the code from returning.