AutoCodes – Dodge – P025B Dodge

P025B Dodge Code - Fuel Pump Control Circuit Performance

Quick Answer

When the Powertrain Control Module (PCM) receives a 'Start' or 'Run' signal from the ignition; It energizes the Fuel Pump relay which sends a continuous 12 volt supply to the Fuel Pump Control Module (FPCM). Common causes include Faulty Fuel Pump Control Module (FPCM), Fuel Pump Control Module (FPCM) Harness is open or shorted, Fuel Pump Control Module (FPCM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P025B Dodge indicates Fuel Pump Control Circuit Performance.
Common causes: Common causes include Faulty Fuel Pump Control Module (FPCM), Fuel Pump Control Module (FPCM) Harness is open or shorted, Fuel Pump Control Module (FPCM) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,686

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 17, 2021

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P025B Dodge Description

When the Powertrain Control Module (PCM) receives a 'Start' or 'Run' signal from the ignition; It energizes the Fuel Pump relay which sends a continuous 12 volt supply to the Fuel Pump Control Module (FPCM). The PCM also sends a control signal directly to the FPCM which regulates the Pulse Width Modulated (PWM) voltage that will be sent to the Fuel Pump Module. The PWM will vary from 10-100% depending on the input of the Fuel Rail Pressure sensor and other engine demands. The Powertrain Control Module (PCM) receives a Pulse Width Modulated (PWM) signal from the Fuel Pump Control Module (FPCM) representing the state of all inputs and outputs of the FPCM. This is a Constant Pressure Fuel system which means any Delta Pressure test performed on the Fuel Pump would show a continuous pressure (regardless of the changes in PWM). If a pressure sensor fails or other failures are present; The duty cycle goes to Limp mode (100%) to maintain fuel pressure.

OBDII Code P025B Dodge - Fuel Pump Control Circuit Performance - AutoCodes.com — P025B Dodge Code - Fuel Pump Control Circuit Performance

What does this mean?

What are the Possible Causes of the DTC P025B Dodge?

Faulty Fuel Pump Control Module (FPCM)
Fuel Pump Control Module (FPCM) Harness is open or shorted
Fuel Pump Control Module (FPCM) circuit poor electrical connection

How to Fix the DTC P025B Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P025B Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P025B Dodge code?

Need more information on how to fix the P025B Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P025B Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.