P0246 Audi Code - Turbo/Super Charger Wastegate Solenoid 'A' High
Quick Answer
This fault code is stored in the Engine Control Module (ECM) when a fault is detected with the wastegate control solenoid circuit. Common causes include Faulty Turbo Boost Control Solenoid Valve, Turbo Boost Control Solenoid Valve harness is open or shorted, Turbo Boost Control Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0246 Audi indicates Turbo/Super Charger Wastegate Solenoid 'A' High.
- Common causes
- Common causes include Faulty Turbo Boost Control Solenoid Valve, Turbo Boost Control Solenoid Valve harness is open or shorted, Turbo Boost Control Solenoid Valve circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0246 Audi Description
What are the Possible Causes of the DTC P0246 Audi?
- Faulty Turbo Boost Control Solenoid Valve
- Turbo Boost Control Solenoid Valve harness is open or shorted
- Turbo Boost Control Solenoid Valve circuit poor electrical connection
- Faulty Engine Control Module (ECM)
- Faulty Wastegate
How to Fix the DTC P0246 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0246 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0246 Audi code?
Need more information on how to fix the P0246 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0246 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0246 Audi Code
1. What are the common symptoms of OBDII code P0246 in an Audi related to the Turbo/Super Charger Wastegate Solenoid 'A' High?
The common symptoms include reduced engine power, decreased fuel efficiency, hesitation or stalling during acceleration, and the illumination of the check engine light.
2. What are the potential causes of OBDII code P0246 indicating an issue with the Turbo/Super Charger Wastegate Solenoid 'A' in an Audi?
Possible causes include a faulty wastegate solenoid, a vacuum leak in the wastegate system, damaged wiring or connectors, or a software issue in the engine control module.
3. How can I diagnose the OBDII code P0246 in my Audi related to the Turbo/Super Charger Wastegate Solenoid 'A' High?
Diagnosis involves using an OBDII scanner to retrieve the trouble code, inspecting the wastegate solenoid and related components for damage, checking for vacuum leaks, and testing the electrical connections.
4. What are the recommended repair tips for resolving OBDII code P0246 in an Audi due to Turbo/Super Charger Wastegate Solenoid 'A' High?
Repair tips include replacing the faulty wastegate solenoid, repairing any vacuum leaks, ensuring proper electrical connections, and clearing the trouble code with an OBDII scanner after completing the repairs.
5. Can driving with OBDII code P0246 related to the Turbo/Super Charger Wastegate Solenoid 'A' High cause further damage to my Audi?
Continuing to drive with this code may lead to more severe engine problems over time, so it is recommended to address the issue promptly to prevent potential damage and maintain optimal vehicle performance.
6. Is it possible to reset the OBDII code P0246 in my Audi without fixing the underlying issue related to the Turbo/Super Charger Wastegate Solenoid 'A' High?
Resetting the code without addressing the root cause will only temporarily clear the check engine light, but the issue will likely resurface. It is crucial to diagnose and repair the problem to prevent future issues.
7. How much does it typically cost to repair OBDII code P0246 indicating a problem with the Turbo/Super Charger Wastegate Solenoid 'A' in an Audi?
The cost of the repair can vary depending on the specific cause of the issue, but it may range from $200 to $500, including parts and labor.
8. Are there any preventive maintenance steps I can take to avoid encountering OBDII code P0246 in my Audi related to the Turbo/Super Charger Wastegate Solenoid 'A' High?
Regularly inspecting and maintaining the turbocharger system, including the wastegate solenoid and associated components, can help prevent issues that may trigger this trouble code.
9. Can a DIY enthusiast with automotive knowledge repair OBDII code P0246 related to the Turbo/Super Charger Wastegate Solenoid 'A' in an Audi?
Depending on their skill level, a DIY enthusiast may be able to diagnose and replace the wastegate solenoid or address simple vacuum leaks. However, more complex issues may require professional expertise.
10. How long does it typically take to repair OBDII code P0246 in an Audi caused by an issue with the Turbo/Super Charger Wastegate Solenoid 'A' High?
The repair time can vary based on the complexity of the problem and the availability of parts, but it may take anywhere from 1 to 3 hours for a professional mechanic to complete the repair.
Discuss the causes and fixes for P0246 Audi OBDII Code
Code P0246 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
