AutoCodes – Ford – P0240 Ford

P0240 Ford Code - Turbocharger/Supercharger Boost Sensor 'B' Circuit Range/Performance

Quick Answer

The boost pressure sensor responds to pressure changes in the intake manifold. Common causes include Boost pressure sensor harness is open or shorted, Boost pressure sensor circuit poor electrical connection, Faulty boost pressure sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0240 Ford indicates Turbocharger/Supercharger Boost Sensor 'B' Circuit Range/Performance.
Common causes: Common causes include Boost pressure sensor harness is open or shorted, Boost pressure sensor circuit poor electrical connection, Faulty boost pressure sensor.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,082

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0240 Ford Description

The boost pressure sensor responds to pressure changes in the intake manifold. This pressure is created by the turbocharger and changes with accelerator pedal position (APP) and engine speed. The Engine Control Module (ECM) uses this information to assist in diagnosis of the barometric pressure (BARO) sensor and to provide engine overboost protection. The boost pressure sensor has a 5-volt reference circuit, a low reference circuit, and a signal circuit. The Engine Control Module (ECM) supplies 5 volts to the boost pressure sensor on the 5-volt reference 2 circuit, and provides a ground on a low reference circuit. The boost pressure sensor provides a signal to the ECM on a signal circuit relative to the pressure changes. The ECM monitors the boost pressure sensor signal for voltage outside of the normal range. The ECM calculates a predicted value for the boost pressure sensor. The ECM then compares the predicted value to the actual signal.

OBDII Code P0240 Ford - Turbocharger/Supercharger Boost Sensor 'B' Circuit Range/Performance - AutoCodes.com — P0240 Ford Code - Turbocharger/Supercharger Boost Sensor 'B' Circuit Range/Performance

What does this mean?

What are the Possible Causes of the DTC P0240 Ford?

Boost pressure sensor harness is open or shorted
Boost pressure sensor circuit poor electrical connection
Faulty boost pressure sensor
Faulty Turbo/Super Charger
Engine over temperature
Ignition misfire exceeds the calibrated threshold
Faulty Knock sensor (KS)

How to Fix the DTC P0240 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0240 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0240 Ford code?

Need more information on how to fix the P0240 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0240 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.