P0232 2000 FORD F150 - Fuel Pump Secondary Circuit High
- Blown Fuel Pump fuse
- Open Fuel Pump Monitor Circuit
- Poor fuel pump ground
- Faulty Fuel Pump Relay
- Damaged Engine Control Module (ECM)
Tech notesFor some FORD models:
1. Disconnect the inertia switch harness connector
2. Turn key to ON position (Engine OFF)
3. Measure voltage of circuit between inertia switch harness connector and ground
4. If battery voltage is found, replaced Inertia Switch
5. Clear codes
For natural gas applications, the following description applies to the fuel shutoff valve monitor (FSVM) and the fuel shutoff valve power (FSV PWR) circuits.
The PCM monitors the fuel pump monitor (FPM) circuit. This test fails when the PCM detects voltage on the FPM circuit while the fuel pump is commanded OFF. The FPM circuit is wired to a pull-up voltage inside the PCM. The FPM circuit will go high if, with the key ON and the fuel pump commanded OFF, the FPM/FP PWR circuit loses its path to ground through the fuel pump. The FPM circuit will also go high if the FPM/FP PWR circuit is shorted to power.
When is the code detected?The code will be set if a low voltage on the control circuit of the fuel pump relay is detected by the ECM.
- Engine Light ON (or Service Engine Soon Warning Light)
P0232 2000 Ford F150 DescriptionThe Engine Control Module (ECM) provides ignition positive voltage to the coil side of the fuel pump relay. When the ignition switch is first turned ON, the ECM energizes the fuel pump relay, which applies power to the fuel pump. The ECM enables the fuel pump relay as long as the engine is cranking or running, and crankshaft reference pulses are received. If no crankshaft reference pulses are received, the ECM de-energizes the fuel pump relay after 2 seconds. The ECM monitors the voltage on the fuel pump relay control circuit.
Need more help?Get the P0232 2000 Ford F150 code diagnosed by a professional: Find a repair shop in your area
P0232 2000 FORD F150 CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0232 2000 Ford F150 code? Have you replaced any parts?
Any information is appreciated. Thanks