P0228 Volkswagen Code - Throttle Pedal Position Sensor/Switch 'C' Circuit High
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. Common causes include Faulty Throttle Position Sensor (TPS), Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0228 Volkswagen indicates Throttle Pedal Position Sensor/Switch 'C' Circuit High .
- Common causes
- Common causes include Faulty Throttle Position Sensor (TPS), Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0228 Volkswagen Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM) In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P0228 Volkswagen?
- Faulty Throttle Position Sensor (TPS)
- Throttle Position Sensor (TPS) harness is open or shorted
- Throttle Position Sensor (TPS) circuit poor electrical connection
How to Fix the DTC P0228 Volkswagen?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0228 Volkswagen code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0228 Volkswagen code?
Need more information on how to fix the P0228 Volkswagen code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0228 Volkswagen code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0228 Volkswagen Code
1. What does the OBDII code P0228 mean for a Volkswagen?
P0228 indicates a high voltage issue in the Throttle Pedal Position Sensor/Switch 'C' circuit, which monitors and controls the throttle input.
2. What are the common symptoms of code P0228 in a Volkswagen?
Symptoms include poor acceleration, engine stalling, limited throttle response, activation of limp mode, and the Check Engine Light illuminating.
3. What causes the P0228 code to appear in a Volkswagen?
Common causes include a faulty throttle pedal position sensor, damaged wiring or connectors in the sensor circuit, or a malfunctioning engine control module (ECM).
4. Can a dirty throttle body trigger the P0228 code in a Volkswagen?
No, a dirty throttle body is unlikely to cause P0228 directly, as this code specifically relates to the sensor circuit's high voltage issue.
5. How do you diagnose the P0228 code on a Volkswagen?
Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting wiring and connectors, testing the throttle position sensor with a multimeter, and checking for ECM-related issues.
6. Is it safe to drive a Volkswagen with the P0228 code?
Driving with this code is not recommended, as it can lead to limited throttle response, reduced power, or unexpected stalling, potentially causing unsafe driving conditions.
7. How can I fix the P0228 code in a Volkswagen?
Repairs may include replacing the throttle pedal position sensor, fixing or replacing damaged wiring, cleaning electrical connectors, or, in rare cases, replacing the ECM.
8. Can a dead battery cause the P0228 code in a Volkswagen?
While unlikely, a weak or dead battery may contribute to electrical issues, though it is not a direct cause of the P0228 code.
9. How much does it cost to fix the P0228 code in a Volkswagen?
Repair costs can vary but typically range from $100 to $300 for parts and labor, depending on whether the issue is with the sensor, wiring, or connectors.
10. Can I clear the P0228 code without repairing the issue?
You can clear the code with an OBDII scanner, but it will likely return unless the underlying problem is resolved.
Discuss the causes and fixes for P0228 Volkswagen OBDII Code
Code P0228 Volkswagen comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
