P0226 Ford Code - Throttle/Pedal Position Sensor/Switch 'C' Circuit Range/Performance Problem
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. Common causes include Faulty Throttle Position Sensor (TPS), Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0226 Ford indicates Throttle/Pedal Position Sensor/Switch 'C' Circuit Range/Performance Problem.
- Common causes
- Common causes include Faulty Throttle Position Sensor (TPS), Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0226 Ford Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM) In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P0226 Ford?
- Faulty Throttle Position Sensor (TPS)
- Throttle Position Sensor (TPS) harness is open or shorted
- Throttle Position Sensor (TPS) circuit poor electrical connection
How to Fix the DTC P0226 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0226 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0226 Ford code?
Need more information on how to fix the P0226 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0226 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0226 Ford Code
1. What does the OBDII code P0226 mean for a Ford vehicle?
- Code P0226 indicates a problem with the Throttle/Pedal Position Sensor/Switch 'C' Circuit, suggesting that its input signal to the vehicle’s engine control module (ECM) is out of the expected range or is performing irregularly.
2. What are the common symptoms of code P0226 in a Ford?
- Symptoms include erratic or unresponsive throttle response, engine stalling or hesitation, reduced fuel efficiency, and in some cases, the engine may enter a limp mode to prevent damage.
3. What might cause code P0226 to appear on a Ford?
- Common causes include faulty or misaligned throttle position sensor, damaged wiring or connectors to the sensor, or issues with the engine control module itself.
4. How can I diagnose the problem associated with code P0226 on my Ford?
- Diagnosis involves checking the throttle position sensor and its wiring for damage, continuity, and proper voltage levels using a multimeter, and inspecting the pedal assembly for any mechanical faults or misalignments.
5. What steps should be taken to fix the issue when a Ford shows the P0226 code?
- Repairing this issue may involve replacing the throttle position sensor, repairing or replacing damaged wiring, or recalibrating the sensor and pedal assembly alignment.
6. Is it safe to drive a Ford with the P0226 code logged?
- Driving with code P0226 can be risky as it may result in unpredictable vehicle behavior or loss of power while on the road. It is advisable to address the issue promptly.
7. What is the potential cost to resolve a P0226 code in a Ford?
- Costs can vary widely depending on the specific cause. Sensor replacements might range from $100 to $400, while wiring repairs or ECM issues could be significantly more expensive.
8. Could ignoring the P0226 code lead to further vehicle problems?
- Ignoring this code can lead to more severe issues like complete loss of throttle control, increased emissions, or even engine failure if not addressed promptly.
9. How frequently does code P0226 occur in Fords, and are certain models more susceptible?
- The frequency of P0226 can depend on model and usage conditions. Models with electronic throttle control are more likely to experience this issue, especially as they age or accumulate mileage.
10. Can regular vehicle maintenance help prevent the occurrence of code P0226?
- Regular maintenance, including checking sensor function, cable integrity, and ensuring that the throttle body is clean and functioning properly, can help prevent issues like P0226.
Discuss the causes and fixes for P0226 Ford OBDII Code
Code P0226 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
