AutoCodes – Toyota – P0223 2015 Toyota RAV4

P0223 2015 Toyota RAV4 Code - Throttle / Pedal Position Sensor / Switch 'B' Circuit High Input

Quick Answer

The throttle position sensor is mounted on the throttle with motor body assembly and detects the opening angle of the throttle valve. Common causes include Faulty Throttle Position Sensor (built into Throttle Body Assembly), Throttle Position Sensor circuit is open or shorted, Throttle Position Sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0223 2015 Toyota RAV4 indicates Throttle / Pedal Position Sensor / Switch 'B' Circuit High Input.
Common causes: Common causes include Faulty Throttle Position Sensor (built into Throttle Body Assembly), Throttle Position Sensor circuit is open or shorted, Throttle Position Sensor poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 498

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 23, 2022

Description
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0223 2015 Toyota RAV4 Description

The throttle position sensor is mounted on the throttle with motor body assembly and detects the opening angle of the throttle valve. This sensor is a non-contact type sensor. It uses Hall-effect elements in order to yield accurate signals even in extreme driving conditions, such as at high speeds as well as very low speeds.
As the valve closes, the sensor output voltage decreases and as the valve opens, the sensor output voltage increases. The Engine Control Module (ECM) calculates the throttle valve opening angle according to these signals and controls the throttle actuator in response to driver inputs. These signals are also used in calculations such as air-fuel ratio correction, power increase correction, and fuel-cut control.
The ECM uses the throttle position sensor to monitor the throttle valve opening angle. There are several checks that the ECM performs to confirm the proper operation of the throttle position sensor.
This sensor transmits two signals, if the output voltage difference between the two signals deviates from the normal operating range, the ECM interprets this as a malfunction in the throttle position sensor. The ECM illuminates the MIL and stores the Diagnostic Trouble Code (DTC).

OBDII Code P0223 2015 Toyota RAV4 - Throttle / Pedal Position Sensor / Switch 'B' Circuit High Input - AutoCodes.com — P0223 2015 Toyota RAV4 Code - Throttle / Pedal Position Sensor / Switch 'B' Circuit High Input

What does this mean?

What are the Possible Causes of the DTC P0223 2015 Toyota RAV4?

Faulty Throttle Position Sensor (built into Throttle Body Assembly)
Throttle Position Sensor circuit is open or shorted
Throttle Position Sensor poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0223 2015 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Quite a frequent problem with Toyota models. Before replacing any parts, try cleaning the throttle body and resetting the code. If the code comes back, it will be necessary to replace the Throttle Body Assembly.

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0223 2015 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0223 2015 Toyota RAV4 code?

Need more information on how to fix the P0223 2015 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0223 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0223 2015 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P0223 in a 2015 Toyota RAV4?

- Common symptoms include a check engine light, reduced engine power, hesitation or stalling when accelerating, and potential difficulty in reaching higher speeds.

2. What does the Throttle / Pedal Position Sensor / Switch 'B' Circuit High Input mean in relation to code P0223?

- This means that the Engine Control Module (ECM) has detected a higher than normal voltage signal from the throttle or pedal position sensor 'B', indicating a potential issue with the sensor or its circuit.

3. What are the possible causes of code P0223 in a 2015 Toyota RAV4?

- The causes can include a faulty throttle or pedal position sensor 'B', damaged wiring or connectors in the sensor circuit, a malfunctioning ECM, or a potential issue with the throttle body.

4. How can I diagnose the source of OBDII code P0223 in my 2015 Toyota RAV4?

- Diagnosis typically involves using a scan tool to read the code, testing the throttle or pedal position sensor 'B' for proper voltage output, inspecting the sensor wiring and connectors for damage, and checking for any other related issues.

5. Can I continue driving my 2015 Toyota RAV4 with OBDII code P0223?

- It is not recommended to drive with this code active, as it can lead to potential safety hazards and further damage to the vehicle. It is best to address the issue promptly.

6. How can I repair OBDII code P0223 in my 2015 Toyota RAV4?

- Repair options may include replacing the faulty throttle or pedal position sensor 'B', repairing damaged wiring or connectors, resetting the ECM, or seeking assistance from a qualified mechanic for a proper diagnosis and repair.

7. Is it possible to reset OBDII code P0223 in a 2015 Toyota RAV4 without fixing the underlying issue?

- While clearing the code may temporarily turn off the check engine light, the underlying problem causing the code will persist. It is crucial to address the root cause of the issue for a lasting solution.

8. How much does it typically cost to repair OBDII code P0223 in a 2015 Toyota RAV4?

- The cost of repair can vary depending on the specific cause of the code and the labor rates in your area. It is advisable to obtain quotes from reputable repair shops for an accurate estimate.

9. Will OBDII code P0223 cause permanent damage to my 2015 Toyota RAV4 if left unaddressed?

- Ignoring this code can potentially lead to further damage to the engine or other components over time. It is best to address the issue promptly to prevent any long-term consequences.

10. Can a DIY enthusiast fix OBDII code P0223 in a 2015 Toyota RAV4, or is professional help necessary?

- While some may be able to diagnose and fix simpler issues related to this code, it is recommended to seek professional help, especially for complex electronic or sensor-related problems to avoid misdiagnosis or further damage.