P0223 2013 Nissan Rogue Code - Throttle Position Sensor 1 Circuit High Input
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0223 2013 Nissan Rogue indicates Throttle Position Sensor 1 Circuit High Input.
- Common causes
- Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0223 2013 Nissan Rogue Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM) In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P0223 2013 Nissan Rogue?
- Faulty Throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor poor electrical connection
- Faulty accelerator pedal position sensor
How to Fix the DTC P0223 2013 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0223 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0223 2013 Nissan Rogue code?
Need more information on how to fix the P0223 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0223 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0223 2013 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0223 in a 2013 Nissan Rogue?
The common symptoms include issues like reduced engine power, hesitation or stalling when accelerating, and the vehicle going into "limp mode."
2. What does the OBDII code P0223 in a 2013 Nissan Rogue indicate?
OBDII code P0223 indicates a Throttle Position Sensor 1 Circuit High Input problem, meaning there is a higher than expected voltage signal detected in the throttle position sensor circuit.
3. What are the possible causes of OBDII code P0223 in a 2013 Nissan Rogue?
Possible causes include a faulty throttle position sensor, damaged wiring or connectors in the sensor circuit, a defective engine control module, or issues with the throttle body.
4. How can I diagnose the OBDII code P0223 in my 2013 Nissan Rogue?
Diagnosing this code typically involves using a scan tool to retrieve the code, checking the throttle position sensor's wiring and connections, testing the sensor's voltage output, and inspecting the throttle body for any issues.
5. Can I continue driving my 2013 Nissan Rogue with OBDII code P0223?
It is not recommended to drive the vehicle with this code present as it can lead to performance issues and potentially cause further damage to the engine or related components.
6. How can I repair OBDII code P0223 in my 2013 Nissan Rogue?
Repairing this code usually involves replacing the throttle position sensor if it is found to be faulty, repairing any damaged wiring or connectors, or addressing any issues with the throttle body or engine control module.
7. Is it possible to reset the OBDII code P0223 in a 2013 Nissan Rogue without fixing the underlying issue?
Resetting the code without addressing the underlying problem will only temporarily clear the error code, and it is likely to reappear once the issue persists.
8. How much does it typically cost to repair OBDII code P0223 in a 2013 Nissan Rogue?
The cost of repairing this code can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Can a DIY enthusiast fix OBDII code P0223 in a 2013 Nissan Rogue?
While some experienced DIY enthusiasts may be able to diagnose and replace the throttle position sensor themselves, it is recommended to seek professional help for a proper diagnosis and repair.
10. How long does it take to repair OBDII code P0223 in a 2013 Nissan Rogue?
The repair time can vary based on the exact cause of the issue and the technician's experience, but it typically takes around 1-2 hours to diagnose and replace the throttle position sensor or address related issues.
Discuss the causes and fixes for P0223 2013 Nissan Rogue OBDII Code
Code P0223 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
