P0223 2012 Nissan Rogue Code - Throttle Position Sensor 1 Circuit High Input
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0223 2012 Nissan Rogue indicates Throttle Position Sensor 1 Circuit High Input.
- Common causes
- Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0223 2012 Nissan Rogue Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM) In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P0223 2012 Nissan Rogue?
- Faulty Throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor poor electrical connection
- Faulty accelerator pedal position sensor
How to Fix the DTC P0223 2012 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0223 2012 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0223 2012 Nissan Rogue code?
Need more information on how to fix the P0223 2012 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0223 2012 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0223 2012 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0223 on a 2012 Nissan Rogue?
- Common symptoms include issues with acceleration, lack of power, engine stalling, and the vehicle going into limp mode.
2. What does the OBDII code P0223 "Throttle Position Sensor 1 Circuit High Input" mean on a 2012 Nissan Rogue?
- This code indicates that the Engine Control Module (ECM) has detected a high voltage input signal from the throttle position sensor.
3. What are the possible causes of OBDII code P0223 on a 2012 Nissan Rogue?
- Possible causes include a faulty throttle position sensor, damaged wiring or connectors in the throttle position sensor circuit, or issues with the ECM.
4. How can I diagnose the OBDII code P0223 on my 2012 Nissan Rogue?
- Diagnosis typically involves checking the throttle position sensor for proper voltage output, inspecting the wiring and connectors for damage, and using a scan tool to read live data from the sensor.
5. Can I continue driving my 2012 Nissan Rogue with OBDII code P0223?
- It is not recommended to drive the vehicle with this code present, as it can lead to performance issues and potential safety concerns. It's best to address the underlying problem promptly.
6. How can I repair OBDII code P0223 on my 2012 Nissan Rogue?
- Repair often involves replacing the throttle position sensor, repairing any damaged wiring or connectors, and clearing the code with a scan tool.
7. Will resetting the OBDII code P0223 on my 2012 Nissan Rogue make it go away permanently?
- Resetting the code may temporarily clear it, but if the underlying issue is not addressed, the code is likely to return.
8. Can a DIY enthusiast fix OBDII code P0223 on a 2012 Nissan Rogue?
- Depending on the individual's skill level and access to tools, some DIY enthusiasts may be able to replace the throttle position sensor or repair wiring themselves. However, professional diagnosis is recommended for accuracy.
9. How much does it cost to repair OBDII code P0223 on a 2012 Nissan Rogue?
- The cost of repair can vary depending on the root cause of the issue, but it typically involves the cost of a new throttle position sensor and labor charges if done at a repair shop.
10. Is OBDII code P0223 a common issue in 2012 Nissan Rogues?
- While not extremely common, issues with the throttle position sensor leading to code P0223 can occur in 2012 Nissan Rogues, especially as the vehicle ages.
Discuss the causes and fixes for P0223 2012 Nissan Rogue OBDII Code
Code P0223 2012 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
