P0223 2011 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'B' Circuit High
Quick Answer
The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the Powertrain Control Module (PCM) indicating a high voltage. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0223 2011 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'B' Circuit High .
- Common causes
- Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0223 2011 Ford Fusion Description
What are the Possible Causes of the DTC P0223 2011 Ford Fusion?
- Faulty Throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor poor electrical connection
How to Fix the DTC P0223 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0223 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0223 2011 Ford Fusion code?
Need more information on how to fix the P0223 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0223 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0223 2011 Ford Fusion Code
1. What are the common symptoms of OBDII code P0223 in a 2011 Ford Fusion?
The common symptoms of OBDII code P0223 in a 2011 Ford Fusion include issues with acceleration, sudden loss of power, and the vehicle going into limp mode.
2. What does the OBDII code P0223 indicate in a 2011 Ford Fusion?
OBDII code P0223 in a 2011 Ford Fusion indicates a problem with the Throttle/Pedal Position Sensor/Switch 'B' Circuit High.
3. What are the possible causes of OBDII code P0223 in a 2011 Ford Fusion?
Possible causes of OBDII code P0223 in a 2011 Ford Fusion include a faulty throttle position sensor, wiring issues, a defective accelerator pedal position sensor, or a problem with the engine control module.
4. How can I diagnose the Throttle/Pedal Position Sensor/Switch 'B' Circuit High issue in a 2011 Ford Fusion?
To diagnose the Throttle/Pedal Position Sensor/Switch 'B' Circuit High issue in a 2011 Ford Fusion, you can use a scan tool to read the trouble codes, check the wiring for any damage, and test the throttle position sensor and accelerator pedal position sensor for proper function.
5. Can I drive my 2011 Ford Fusion with OBDII code P0223?
It is not recommended to drive your 2011 Ford Fusion with OBDII code P0223 as it can lead to performance issues and potential safety hazards. It's best to address the issue promptly.
6. How do I repair OBDII code P0223 in a 2011 Ford Fusion?
To repair OBDII code P0223 in a 2011 Ford Fusion, you may need to replace the faulty throttle position sensor or accelerator pedal position sensor, repair any damaged wiring, or reprogram the engine control module.
7. Will resetting the OBDII code P0223 in my 2011 Ford Fusion make it go away permanently?
Resetting the OBDII code P0223 in your 2011 Ford Fusion may temporarily clear the code, but if the underlying issue is not fixed, the code is likely to reappear. It's important to diagnose and address the root cause of the problem.
8. How much does it cost to fix OBDII code P0223 in a 2011 Ford Fusion?
The cost to fix OBDII code P0223 in a 2011 Ford Fusion can vary depending on the specific cause of the issue, the parts needed for repair, and labor costs. It is recommended to consult a professional mechanic for an accurate estimate.
9. Can a DIY enthusiast repair OBDII code P0223 in a 2011 Ford Fusion?
While some DIY enthusiasts may have the skills to diagnose and repair OBDII code P0223 in a 2011 Ford Fusion, it is a complex issue that may require specialized tools and knowledge. It is advisable to seek professional help for proper diagnosis and repair.
10. How often does OBDII code P0223 occur in a 2011 Ford Fusion?
OBDII code P0223 can occur in a 2011 Ford Fusion due to various reasons such as sensor failures or wiring issues. The frequency of occurrence may vary depending on the vehicle's usage and maintenance history.
Discuss the causes and fixes for P0223 2011 Ford Fusion OBDII Code
Code P0223 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
