P0223 2010 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'B' Circuit High
Quick Answer
The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the Powertrain Control Module (PCM) indicating a high voltage. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0223 2010 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'B' Circuit High .
- Common causes
- Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0223 2010 Ford Fusion Description
What are the Possible Causes of the DTC P0223 2010 Ford Fusion?
- Faulty Throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor poor electrical connection
How to Fix the DTC P0223 2010 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0223 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0223 2010 Ford Fusion code?
Need more information on how to fix the P0223 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0223 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0223 2010 Ford Fusion Code
1. What are the common symptoms of OBDII code P0223 in a 2010 Ford Fusion?
When the Throttle/Pedal Position Sensor/Switch 'B' Circuit registers high, you may experience issues such as reduced engine power, hesitation during acceleration, and the vehicle going into "limp mode."
2. What can cause the Throttle/Pedal Position Sensor/Switch 'B' Circuit High code P0223 in a 2010 Ford Fusion?
Common causes of this code include a faulty throttle position sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module (ECM).
3. How serious is OBDII code P0223 in a 2010 Ford Fusion?
While the vehicle may still be drivable with this code, it is important to address it promptly to prevent potential safety hazards and further damage to the engine or other components.
4. Can I continue driving my 2010 Ford Fusion with OBDII code P0223?
It is not recommended to drive the vehicle with the Throttle/Pedal Position Sensor/Switch 'B' Circuit High code present, as it can lead to performance issues and potentially cause further damage.
5. How can I diagnose and repair OBDII code P0223 in my 2010 Ford Fusion?
Diagnosis typically involves testing the throttle position sensor, inspecting wiring and connectors for damage, and checking the ECM for any faults. Repair may involve replacing the sensor, repairing wiring issues, or resetting the ECM.
6. Can I reset the OBDII code P0223 in my 2010 Ford Fusion by disconnecting the battery?
While disconnecting the battery may clear the code temporarily, it is important to address the underlying issue causing the fault code to prevent it from reoccurring.
7. How much does it cost to repair OBDII code P0223 in a 2010 Ford Fusion?
The cost of repairing this code can vary depending on the specific issue, but it may involve replacing the throttle position sensor, repairing wiring, or addressing ECM problems. Costs can range from a few hundred to over a thousand dollars.
8. Will OBDII code P0223 cause my 2010 Ford Fusion to fail an emissions test?
If the Check Engine light is on due to code P0223, your vehicle is likely to fail an emissions test. It is recommended to diagnose and repair the issue before undergoing an emissions test.
9. How long does it take to repair OBDII code P0223 in a 2010 Ford Fusion?
The repair time for this code can vary based on the specific cause and the complexity of the repair needed. It may take anywhere from a couple of hours to a day or more to complete the repair.
10. Can a DIY enthusiast fix OBDII code P0223 in a 2010 Ford Fusion?
Depending on your skill level and access to tools, you may be able to diagnose and repair this code yourself. However, it is recommended to have some knowledge of automotive systems before attempting the repair to ensure it is done correctly.
Discuss the causes and fixes for P0223 2010 Ford Fusion OBDII Code
Code P0223 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
