P0223 2009 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'B' Circuit High
Quick Answer
The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the Powertrain Control Module (PCM) indicating a high voltage. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0223 2009 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'B' Circuit High .
- Common causes
- Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0223 2009 Ford Fusion Description
What are the Possible Causes of the DTC P0223 2009 Ford Fusion?
- Faulty Throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor poor electrical connection
How to Fix the DTC P0223 2009 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0223 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0223 2009 Ford Fusion code?
Need more information on how to fix the P0223 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0223 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0223 2009 Ford Fusion Code
1. What are the common symptoms of OBDII code P0223 in a 2009 Ford Fusion?
- Common symptoms include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into limp mode.
2. What does the Throttle/Pedal Position Sensor/Switch 'B' Circuit High code P0223 indicate in a 2009 Ford Fusion?
- The code indicates that the voltage signal from the throttle/pedal position sensor or switch 'B' is higher than normal, suggesting a malfunction in the sensor or its circuit.
3. What are the possible causes of OBDII code P0223 in a 2009 Ford Fusion?
- Possible causes include a faulty throttle position sensor, damaged wiring or connectors in the sensor circuit, a malfunctioning throttle body, or issues with the engine control module (ECM).
4. How can I diagnose the Throttle/Pedal Position Sensor/Switch 'B' Circuit High code P0223 in my 2009 Ford Fusion?
- Diagnosing the code typically involves using an OBDII scanner to retrieve the code, inspecting the throttle position sensor and its wiring for damage, and testing the sensor's voltage output.
5. Can I continue driving my 2009 Ford Fusion with OBDII code P0223 present?
- It is not recommended to continue driving with the code present, as it can lead to further damage and potentially unsafe driving conditions. It's best to address the issue promptly.
6. How can I repair OBDII code P0223 in my 2009 Ford Fusion?
- Repair options may include replacing the throttle position sensor, repairing or replacing damaged wiring or connectors, cleaning the throttle body, or reprogramming the engine control module.
7. Is it possible to reset OBDII code P0223 in a 2009 Ford Fusion without fixing the underlying issue?
- While clearing the code with an OBDII scanner may temporarily turn off the check engine light, the code is likely to return if the underlying issue is not addressed.
8. How much does it typically cost to repair OBDII code P0223 in a 2009 Ford Fusion?
- The cost of repairing the code can vary depending on the specific cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Are there any preventive measures to avoid OBDII code P0223 in a 2009 Ford Fusion?
- Regularly inspecting and maintaining the throttle position sensor, keeping the throttle body clean, and addressing any engine performance issues promptly can help prevent the code from occurring.
10. Can a DIY enthusiast fix OBDII code P0223 in a 2009 Ford Fusion?
- Depending on their skill level and access to tools, a DIY enthusiast may be able to address simpler causes of the code, such as replacing the throttle position sensor or repairing damaged wiring. For more complex issues, professional assistance may be needed.
Discuss the causes and fixes for P0223 2009 Ford Fusion OBDII Code
Code P0223 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
