AutoCodes – Ford – P0223 2008 Ford Fusion

P0223 2008 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'B' Circuit High

Quick Answer

The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the Powertrain Control Module (PCM) indicating a high voltage. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0223 2008 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'B' Circuit High .
Common causes: Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,203

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0223 2008 Ford Fusion Description

The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the Powertrain Control Module (PCM) indicating a high voltage.

OBDII Code P0223 2008 Ford Fusion - Throttle/Pedal Position Sensor/Switch 'B' Circuit High - AutoCodes.com — P0223 2008 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'B' Circuit High

What does this mean?

What are the Possible Causes of the DTC P0223 2008 Ford Fusion?

Faulty Throttle position sensor
Throttle position sensor harness is open or shorted
Throttle position sensor poor electrical connection

How to Fix the DTC P0223 2008 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0223 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0223 2008 Ford Fusion code?

Need more information on how to fix the P0223 2008 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0223 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0223 2008 Ford Fusion Code

1. What are the common symptoms of OBDII code P0223 on a 2008 Ford Fusion?

- The common symptoms of code P0223 include decreased engine performance, rough idling, stalling, and the vehicle going into limp mode.

2. What does the Throttle/Pedal Position Sensor/Switch 'B' Circuit High mean in relation to OBDII code P0223 for a 2008 Ford Fusion?

- The code indicates that the voltage signal from the throttle or pedal position sensor/switch 'B' is higher than the specified range set by the vehicle's ECM.

3. What are the possible causes of OBDII code P0223 on a 2008 Ford Fusion?

- The potential causes of code P0223 include a faulty throttle position sensor, issues with the wiring or connectors in the sensor circuit, or a problem with the ECM itself.

4. How can I diagnose the Throttle/Pedal Position Sensor/Switch 'B' Circuit High issue on a 2008 Ford Fusion?

- Diagnosing the problem involves using a scan tool to read the code, checking the sensor's wiring and connectors for any damage, and testing the sensor's voltage output.

5. Is it safe to continue driving a 2008 Ford Fusion with OBDII code P0223?

- It is not recommended to drive the vehicle with code P0223, as it can lead to further damage and potential safety hazards due to the associated symptoms.

6. Can I reset the OBDII code P0223 on my 2008 Ford Fusion by disconnecting the battery?

- While disconnecting the battery may temporarily clear the code, it is not a proper repair method. The underlying issue causing the code needs to be diagnosed and fixed.

7. How much does it typically cost to repair OBDII code P0223 on a 2008 Ford Fusion?

- The cost of repair can vary depending on the exact cause of the code, but it may involve replacing the throttle position sensor or addressing wiring/connectivity issues. Costs can range from $100 to $300 or more.

8. Can a DIY enthusiast fix OBDII code P0223 on a 2008 Ford Fusion?

- Depending on the skill level and experience, some DIY enthusiasts may be able to diagnose and replace the throttle position sensor themselves. However, proper diagnostic tools and knowledge are essential.

9. Will OBDII code P0223 cause the check engine light to illuminate on a 2008 Ford Fusion?

- Yes, code P0223 will trigger the check engine light to come on in the instrument cluster of the 2008 Ford Fusion to alert the driver of the issue.

10. How long does it typically take to repair OBDII code P0223 on a 2008 Ford Fusion?

- The repair time can vary based on the exact cause of the code and the availability of parts. In general, a skilled mechanic can address the issue within a few hours to a day.