P0223 2007 Nissan Maxima Code - Throttle Position Sensor/Switch 2 Circuit High Input
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0223 2007 Nissan Maxima indicates Throttle Position Sensor/Switch 2 Circuit High Input.
- Common causes
- Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0223 2007 Nissan Maxima Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM) In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P0223 2007 Nissan Maxima?
- Faulty Throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor poor electrical connection
- Faulty accelerator pedal position sensor
How to Fix the DTC P0223 2007 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0223 2007 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0223 2007 Nissan Maxima code?
Need more information on how to fix the P0223 2007 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0223 2007 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0223 2007 Nissan Maxima Code
1. What are common symptoms of OBDII code P0223 on a 2007 Nissan Maxima?
- Common symptoms include the vehicle going into limp mode, reduced engine power, acceleration issues, and the check engine light coming on.
2. What does the OBDII code P0223 indicate on a 2007 Nissan Maxima?
- OBDII code P0223 indicates a problem with the Throttle Position Sensor/Switch 2 Circuit High Input.
3. What are possible causes of OBDII code P0223 on a 2007 Nissan Maxima?
- Possible causes include a faulty throttle position sensor, a short or open circuit in the sensor wiring, a damaged connector, or a problem with the engine control module.
4. How can I diagnose the Throttle Position Sensor/Switch 2 Circuit High Input issue on my 2007 Nissan Maxima?
- You can diagnose the issue by using an OBDII scanner to read the trouble codes, performing a visual inspection of the sensor and wiring, and testing the sensor's voltage output.
5. Can I continue driving my 2007 Nissan Maxima with OBDII code P0223?
- It is not recommended to continue driving the vehicle with this code as it can lead to further damage and potential safety issues. It's best to address the problem promptly.
6. How can I repair OBDII code P0223 on a 2007 Nissan Maxima?
- Repair options include replacing the throttle position sensor, repairing any damaged wiring, ensuring proper connector connections, and resetting the trouble codes with an OBDII scanner.
7. Are there any DIY tips for fixing OBDII code P0223 on a 2007 Nissan Maxima?
- While some basic repairs like checking and cleaning sensor connections can be done by DIY enthusiasts, it is recommended to consult a professional mechanic for accurate diagnosis and repair of this issue.
8. Will resetting the OBDII code P0223 on a 2007 Nissan Maxima make the problem go away?
- Resetting the code may temporarily turn off the check engine light, but if the underlying issue causing the code is not addressed, the problem is likely to reoccur.
9. How much does it typically cost to repair OBDII code P0223 on a 2007 Nissan Maxima?
- Repair costs can vary depending on the exact cause of the issue, but replacing the throttle position sensor or repairing wiring can range from $100 to $300, including parts and labor.
10. Is it safe to clear the OBDII code P0223 on a 2007 Nissan Maxima without fixing the underlying issue?
- It is not recommended to clear the code without fixing the problem as it can lead to unresolved issues with the vehicle's performance and potentially cause further damage.
Discuss the causes and fixes for P0223 2007 Nissan Maxima OBDII Code
Code P0223 2007 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
