P0222 2013 Toyota RAV4 Code - Throttle / Pedal Position Sensor / Switch 'B' Circuit Low Input
Quick Answer
The throttle position sensor is mounted on the throttle with motor body assembly and detects the opening angle of the throttle valve. Common causes include Faulty Throttle Position Sensor (built into Throttle Body Assembly), Throttle Position Sensor circuit is open or shorted, Throttle Position Sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0222 2013 Toyota RAV4 indicates Throttle / Pedal Position Sensor / Switch 'B' Circuit Low Input.
- Common causes
- Common causes include Faulty Throttle Position Sensor (built into Throttle Body Assembly), Throttle Position Sensor circuit is open or shorted, Throttle Position Sensor poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0222 2013 Toyota RAV4 Description
As the valve closes, the sensor output voltage decreases and as the valve opens, the sensor output voltage increases. The Engine Control Module (ECM) calculates the throttle valve opening angle according to these signals and controls the throttle actuator in response to driver inputs. These signals are also used in calculations such as air-fuel ratio correction, power increase correction, and fuel-cut control.
The ECM uses the throttle position sensor to monitor the throttle valve opening angle. There are several checks that the ECM performs to confirm the proper operation of the throttle position sensor.
This sensor transmits two signals, if the output voltage difference between the two signals deviates from the normal operating range, the ECM interprets this as a malfunction in the throttle position sensor. The ECM illuminates the MIL and stores the Diagnostic Trouble Code (DTC).
What are the Possible Causes of the DTC P0222 2013 Toyota RAV4?
- Faulty Throttle Position Sensor (built into Throttle Body Assembly)
- Throttle Position Sensor circuit is open or shorted
- Throttle Position Sensor poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0222 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0222 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0222 2013 Toyota RAV4 code?
Need more information on how to fix the P0222 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0222 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0222 2013 Toyota RAV4 Code
1. What are the common symptoms of OBDII code P0222 in a 2013 Toyota RAV4?
The common symptoms of OBDII code P0222 in a 2013 Toyota RAV4 may include issues like reduced engine power, hesitation or stalling when accelerating, and the vehicle going into limp mode.
2. What can cause the Throttle/Pedal Position Sensor 'B' Circuit Low Input code in a 2013 Toyota RAV4?
The P0222 code in a 2013 Toyota RAV4 is typically triggered by a faulty throttle or pedal position sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine control module (ECM).
3. How serious is the Throttle/Pedal Position Sensor 'B' Circuit Low Input code in a 2013 Toyota RAV4?
While the P0222 code may not always cause immediate danger, it can lead to drivability issues and potentially unsafe driving conditions. It is important to address this issue promptly to avoid further complications.
4. Can I continue driving my 2013 Toyota RAV4 with the P0222 code present?
It is not recommended to continue driving your 2013 Toyota RAV4 with the P0222 code present, as it can affect the vehicle's performance and reliability. It is best to have the issue diagnosed and repaired as soon as possible.
5. How can I diagnose and repair the Throttle/Pedal Position Sensor 'B' Circuit Low Input code in my 2013 Toyota RAV4?
Diagnosing and repairing the P0222 code may involve testing the throttle and pedal position sensors, checking the sensor circuit for any wiring or connector issues, and verifying the ECM's functionality. It is recommended to consult a professional mechanic for a proper diagnosis and repair.
6. Will resetting the OBDII code P0222 in my 2013 Toyota RAV4 make it go away permanently?
Resetting the P0222 code in your 2013 Toyota RAV4 may temporarily clear the error code, but if the underlying issue causing the code is not addressed, the code is likely to reappear. It is essential to diagnose and fix the root cause of the problem.
7. How much does it cost to repair the Throttle/Pedal Position Sensor 'B' Circuit Low Input code in a 2013 Toyota RAV4?
The cost of repairing the P0222 code in a 2013 Toyota RAV4 can vary depending on the specific cause of the issue, the parts needed for replacement, and the labor charges. It is advisable to obtain quotes from different repair shops for an accurate estimate.
8. Can a DIY enthusiast fix the P0222 code in a 2013 Toyota RAV4?
While some DIY enthusiasts may have the skills and tools to address simple automotive issues, diagnosing and repairing the P0222 code in a 2013 Toyota RAV4 may require specialized equipment and expertise. It is recommended to seek professional help for this particular problem.
9. What are the potential long-term effects of ignoring the Throttle/Pedal Position Sensor 'B' Circuit Low Input code in a 2013 Toyota RAV4?
Ignoring the P0222 code in a 2013 Toyota RAV4 can lead to decreased fuel efficiency, potential damage to other engine components, and even safety hazards due to unpredictable throttle responses. It is crucial to address this issue promptly to prevent further complications.
10. How can I prevent the recurrence of the OBDII code P0222 in my 2013 Toyota RAV4?
To prevent the recurrence of the P0222 code in your 2013 Toyota RAV4, it is essential to perform regular maintenance checks on the throttle and pedal position sensors, ensure proper wiring connections, and promptly address any issues related to the sensor circuit or ECM.
Discuss the causes and fixes for P0222 2013 Toyota RAV4 OBDII Code
Code P0222 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
