P0222 2013 Nissan Rogue Code - Throttle Position Sensor 1 Circuit Low Input
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0222 2013 Nissan Rogue indicates Throttle Position Sensor 1 Circuit Low Input.
- Common causes
- Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0222 2013 Nissan Rogue Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM) In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P0222 2013 Nissan Rogue?
- Faulty Throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor poor electrical connection
- Faulty accelerator pedal position sensor
How to Fix the DTC P0222 2013 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0222 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0222 2013 Nissan Rogue code?
Need more information on how to fix the P0222 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0222 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0222 2013 Nissan Rogue Code
1. What does OBDII code P0222 mean for my 2013 Nissan Rogue?
- The code P0222 indicates a Throttle Position Sensor 1 Circuit Low Input error in your vehicle's system.
2. What are the common symptoms of a Throttle Position Sensor 1 Circuit Low Input issue?
- Common symptoms include reduced engine power, hesitation or stalling, poor acceleration, and potential issues with the vehicle's transmission shifting.
3. What are the possible causes of the P0222 code in a 2013 Nissan Rogue?
- The code may be triggered by a faulty throttle position sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module.
4. How can I diagnose a Throttle Position Sensor 1 Circuit Low Input problem in my Nissan Rogue?
- Diagnosis typically involves using a scan tool to read the OBDII codes, checking the throttle position sensor's voltage, and inspecting the sensor's wiring and connections for any visible damage.
5. Can I continue driving my Nissan Rogue with the P0222 code present?
- It is not recommended to drive your vehicle with the P0222 code active, as it can lead to further damage and potential safety hazards. It is best to address the issue promptly.
6. How can I repair a Throttle Position Sensor 1 Circuit Low Input problem in my 2013 Nissan Rogue?
- Repair options may include replacing the throttle position sensor, repairing or replacing damaged wiring or connectors, or reprogramming the engine control module.
7. Is it possible to reset the P0222 code in my Nissan Rogue without fixing the underlying issue?
- While you can clear the code with a scan tool, the underlying problem causing the P0222 code will persist until properly diagnosed and repaired.
8. Will a Throttle Position Sensor 1 Circuit Low Input issue affect my Nissan Rogue's fuel efficiency?
- Yes, a faulty throttle position sensor can impact fuel efficiency by causing incorrect air-fuel ratios and affecting the engine's performance.
9. Can extreme weather conditions cause the P0222 code to appear in my 2013 Nissan Rogue?
- Extreme temperatures or moisture can sometimes affect sensor performance, potentially triggering the P0222 code in your vehicle.
10. How much can I expect to pay for repairs related to the P0222 code in my 2013 Nissan Rogue?
- Repair costs for a Throttle Position Sensor 1 Circuit Low Input issue can vary depending on the exact cause of the problem, but it's advisable to budget for sensor replacement and potential labor charges.
Discuss the causes and fixes for P0222 2013 Nissan Rogue OBDII Code
Code P0222 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
