P0222 2011 Toyota Camry Code - Throttle/Pedal Position Sensor/Switch 'B' Circuit - Low Input
Quick Answer
The TP sensor is mounted on the throttle body, and detects the opening angle of the throttle valve. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0222 2011 Toyota Camry indicates Throttle/Pedal Position Sensor/Switch 'B' Circuit - Low Input.
- Common causes
- Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0222 2011 Toyota Camry Description
As the valve closes, the sensor output voltage decreases and as the valve opens, the sensor output voltage increases. The ECM calculates the throttle valve opening angle according to these signals and controls the throttle actuator in response to driver inputs. These signals are also used in calculations such as air-fuel ratio correction, power increase correction and fuel-cut control.
What are the Possible Causes of the DTC P0222 2011 Toyota Camry?
- Faulty Throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor poor electrical connection
- ECM
How to Fix the DTC P0222 2011 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0222 2011 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0222 2011 Toyota Camry code?
Need more information on how to fix the P0222 2011 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0222 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0222 2011 Toyota Camry Code
1. What does OBDII code P0222 mean for a 2011 Toyota Camry?
The code P0222 indicates a low input signal from the Throttle/Pedal Position Sensor/Switch 'B' circuit in the 2011 Toyota Camry.
2. What are the common symptoms of OBDII code P0222 in a 2011 Toyota Camry?
Common symptoms include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into limp mode.
3. What are the possible causes of OBDII code P0222 in a 2011 Toyota Camry?
Possible causes include a faulty throttle position sensor, damaged wiring or connectors in the throttle pedal sensor circuit, or a problem with the engine control module (ECM).
4. How can I diagnose the Throttle/Pedal Position Sensor/Switch 'B' circuit for OBDII code P0222 on my 2011 Toyota Camry?
You can use a multimeter to test the throttle position sensor's voltage output, check for any damaged wires or connectors, and perform a thorough inspection of the throttle pedal assembly.
5. Can I drive my 2011 Toyota Camry with OBDII code P0222?
It is not recommended to drive the vehicle with this code as it can lead to unsafe driving conditions and potential damage to the engine or other components.
6. How can I repair OBDII code P0222 in my 2011 Toyota Camry?
Repair options include replacing the throttle position sensor, repairing any damaged wiring or connectors, and resetting the error code with an OBDII scanner after the issue has been resolved.
7. Is it possible to reset OBDII code P0222 in a 2011 Toyota Camry without fixing the underlying issue?
While you can clear the code with an OBDII scanner, it is crucial to address the root cause of the problem to prevent the code from reappearing.
8. How much does it cost to fix OBDII code P0222 in a 2011 Toyota Camry?
The cost of repair can vary depending on the exact cause of the issue, but it may involve parts and labor expenses ranging from $100 to $300 or more.
9. Can a DIY enthusiast fix OBDII code P0222 in a 2011 Toyota Camry?
Depending on your mechanical skills and access to tools, you may be able to diagnose and replace the throttle position sensor yourself. However, complex issues may require professional assistance.
10. How long does it take to repair OBDII code P0222 in a 2011 Toyota Camry?
The repair time can vary based on the exact cause of the problem and your level of experience. Simple fixes like sensor replacement may take an hour or two, while more involved repairs could span several hours or days.
Discuss the causes and fixes for P0222 2011 Toyota Camry OBDII Code
Code P0222 2011 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
