AutoCodes – Ford – P0222 2011 Ford Fusion

P0222 2011 Ford Fusion Code - Throttle Pedal Position Sensor Switch B Circuit Low

Quick Answer

The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the Powertrain Control Module (PCM) indicating a low voltage, or open circuit. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0222 2011 Ford Fusion indicates Throttle Pedal Position Sensor Switch B Circuit Low.
Common causes: Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,658

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0222 2011 Ford Fusion Description

The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the Powertrain Control Module (PCM) indicating a low voltage, or open circuit.

OBDII Code P0222 2011 Ford Fusion - Throttle Pedal Position Sensor Switch B Circuit Low - AutoCodes.com — P0222 2011 Ford Fusion Code - Throttle Pedal Position Sensor Switch B Circuit Low

What does this mean?

What are the Possible Causes of the DTC P0222 2011 Ford Fusion?

Faulty Throttle position sensor
Throttle position sensor harness is open or shorted
Throttle position sensor poor electrical connection

How to Fix the DTC P0222 2011 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0222 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0222 2011 Ford Fusion code?

Need more information on how to fix the P0222 2011 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0222 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0222 2011 Ford Fusion Code

1. What are the common symptoms of OBDII code P0222 in a 2011 Ford Fusion?

The common symptoms of OBDII code P0222 in a 2011 Ford Fusion include reduced engine power, poor acceleration, and potential stalling while driving.

2. What does the OBDII code P0222 for a 2011 Ford Fusion indicate?

OBDII code P0222 for a 2011 Ford Fusion indicates an issue with the Throttle Pedal Position Sensor Switch B Circuit registering a low voltage.

3. What are the possible causes of OBDII code P0222 in a 2011 Ford Fusion?

Possible causes of OBDII code P0222 in a 2011 Ford Fusion include a faulty throttle pedal position sensor, damaged wiring or connectors, or a problem with the engine control module (ECM).

4. How can I diagnose the cause of OBDII code P0222 in my 2011 Ford Fusion?

To diagnose the cause of OBDII code P0222 in a 2011 Ford Fusion, you can use a scan tool to monitor the throttle pedal position sensor's readings, inspect the sensor and its wiring for damage, and check for any loose connections.

5. Is it safe to drive my 2011 Ford Fusion with OBDII code P0222?

It is not recommended to drive your 2011 Ford Fusion with OBDII code P0222, as it can lead to performance issues and potential safety hazards due to the throttle sensor malfunction.

6. Can I repair OBDII code P0222 in my 2011 Ford Fusion myself?

Depending on the exact cause, you may be able to repair OBDII code P0222 in your 2011 Ford Fusion yourself by replacing the throttle pedal position sensor, repairing damaged wiring, or addressing any ECM issues.

7. How much does it typically cost to repair OBDII code P0222 in a 2011 Ford Fusion?

The cost to repair OBDII code P0222 in a 2011 Ford Fusion can vary depending on the specific cause, but it may range from around $100 to $300 for parts and labor.

8. Are there any preventive measures to avoid OBDII code P0222 in my 2011 Ford Fusion?

To prevent OBDII code P0222 in your 2011 Ford Fusion, you can regularly inspect the throttle pedal position sensor, ensure proper maintenance of the vehicle's electrical system, and address any issues promptly.

9. How urgent is it to address OBDII code P0222 in my 2011 Ford Fusion?

It is important to address OBDII code P0222 in your 2011 Ford Fusion promptly to avoid further damage to the vehicle and ensure safe and reliable operation.

10. Can OBDII code P0222 in a 2011 Ford Fusion cause damage to other vehicle components?

If left unresolved, OBDII code P0222 in a 2011 Ford Fusion can potentially cause damage to other components such as the engine due to improper throttle input signals.