P0222 2010 Nissan Rogue Code - Throttle Position Sensor 1 Circuit Low Input
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0222 2010 Nissan Rogue indicates Throttle Position Sensor 1 Circuit Low Input.
- Common causes
- Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0222 2010 Nissan Rogue Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM) In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P0222 2010 Nissan Rogue?
- Faulty Throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor poor electrical connection
- Faulty accelerator pedal position sensor
How to Fix the DTC P0222 2010 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0222 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0222 2010 Nissan Rogue code?
Need more information on how to fix the P0222 2010 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0222 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0222 2010 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0222 in a 2010 Nissan Rogue?
The common symptoms of code P0222 in a 2010 Nissan Rogue include poor acceleration, lack of power, and potentially unstable engine idling.
2. What does the OBDII code P0222 indicate in a 2010 Nissan Rogue?
Code P0222 in a 2010 Nissan Rogue indicates a low input signal from the Throttle Position Sensor 1 circuit.
3. What are the possible causes of OBDII code P0222 in a 2010 Nissan Rogue?
Possible causes of code P0222 in a 2010 Nissan Rogue include a faulty throttle position sensor, damaged wiring or connectors in the throttle position sensor circuit, or a problem in the engine control module.
4. How can I diagnose the Throttle Position Sensor 1 circuit low input issue in my 2010 Nissan Rogue?
To diagnose the Throttle Position Sensor 1 circuit low input issue in a 2010 Nissan Rogue, you can use a scan tool to check for OBDII codes, visually inspect the throttle position sensor and its wiring, and perform voltage tests on the sensor.
5. Can a dirty throttle body cause OBDII code P0222 in a 2010 Nissan Rogue?
Yes, a dirty throttle body can potentially cause code P0222 in a 2010 Nissan Rogue as it may affect the proper operation of the throttle position sensor.
6. Is it safe to continue driving a 2010 Nissan Rogue with OBDII code P0222?
It is not recommended to continue driving a 2010 Nissan Rogue with OBDII code P0222, as it can lead to poor engine performance and potential safety issues. It is advised to address the problem promptly.
7. How can I repair OBDII code P0222 in my 2010 Nissan Rogue?
To repair code P0222 in a 2010 Nissan Rogue, you may need to replace the throttle position sensor, repair any damaged wiring or connectors, or reprogram the engine control module if necessary.
8. Can I reset the OBDII code P0222 in a 2010 Nissan Rogue by disconnecting the battery?
While disconnecting the battery may clear the code temporarily, it is not a recommended long-term solution. It is best to address the underlying issue causing code P0222 in a 2010 Nissan Rogue for a permanent fix.
9. How much does it typically cost to repair OBDII code P0222 in a 2010 Nissan Rogue?
The cost to repair code P0222 in a 2010 Nissan Rogue can vary depending on the specific cause of the issue. It may range from a few hundred to around a thousand dollars, including parts and labor.
10. Can I prevent OBDII code P0222 from recurring in my 2010 Nissan Rogue?
To prevent OBDII code P0222 from recurring in a 2010 Nissan Rogue, it is advisable to perform regular maintenance, keep the throttle body clean, and address any issues with the throttle position sensor promptly.
Discuss the causes and fixes for P0222 2010 Nissan Rogue OBDII Code
Code P0222 2010 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
