AutoCodes – Ford – P0222 2010 Ford Fusion

P0222 2010 Ford Fusion Code - Throttle Pedal Position Sensor Switch B Circuit Low

Quick Answer

The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the Powertrain Control Module (PCM) indicating a low voltage, or open circuit. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0222 2010 Ford Fusion indicates Throttle Pedal Position Sensor Switch B Circuit Low.
Common causes: Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,018

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0222 2010 Ford Fusion Description

The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the Powertrain Control Module (PCM) indicating a low voltage, or open circuit.

OBDII Code P0222 2010 Ford Fusion - Throttle Pedal Position Sensor Switch B Circuit Low - AutoCodes.com — P0222 2010 Ford Fusion Code - Throttle Pedal Position Sensor Switch B Circuit Low

What does this mean?

What are the Possible Causes of the DTC P0222 2010 Ford Fusion?

Faulty Throttle position sensor
Throttle position sensor harness is open or shorted
Throttle position sensor poor electrical connection

How to Fix the DTC P0222 2010 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0222 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0222 2010 Ford Fusion code?

Need more information on how to fix the P0222 2010 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0222 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0222 2010 Ford Fusion Code

1. What are the common symptoms of OBDII code P0222 in a 2010 Ford Fusion?

The common symptoms of code P0222 in a 2010 Ford Fusion include reduced engine power, engine stalling, rough idle, and the illumination of the Check Engine Light.

2. What does the OBDII code P0222 indicate in a 2010 Ford Fusion?

Code P0222 indicates a problem with the Throttle Pedal Position Sensor Switch B Circuit, specifically that the voltage signal is lower than the expected range.

3. What are the possible causes of OBDII code P0222 in a 2010 Ford Fusion?

The possible causes of code P0222 in a 2010 Ford Fusion include a faulty throttle pedal position sensor, damaged wiring or connectors in the circuit, or issues with the engine control module (ECM).

4. How can I diagnose the Throttle Pedal Position Sensor Switch B Circuit Low issue in my 2010 Ford Fusion?

Diagnosing the P0222 code involves using a scan tool to retrieve the fault code, inspecting the throttle pedal position sensor and its wiring for damage, and testing the sensor's voltage output with a multimeter.

5. Can I continue driving my 2010 Ford Fusion with OBDII code P0222?

It is not recommended to continue driving your 2010 Ford Fusion with code P0222, as it can lead to unsafe driving conditions and further damage to the vehicle. It's best to address the issue promptly.

6. How can I repair OBDII code P0222 in my 2010 Ford Fusion?

To repair code P0222 in a 2010 Ford Fusion, you may need to replace the throttle pedal position sensor, repair any damaged wiring or connectors, or reprogram the engine control module if necessary.

7. Will resetting the Check Engine Light clear OBDII code P0222 in my 2010 Ford Fusion?

Resetting the Check Engine Light may temporarily clear the code, but if the underlying issue causing code P0222 is not addressed, the light will likely come back on after driving cycles.

8. Is it possible to prevent OBDII code P0222 from occurring in my 2010 Ford Fusion?

While some cases of code P0222 may be unpredictable, regular maintenance and inspections of the throttle pedal position sensor and related components can help prevent this issue in your 2010 Ford Fusion.

9. Can a DIY enthusiast fix OBDII code P0222 in a 2010 Ford Fusion?

Depending on your skill level and access to tools, a DIY enthusiast may be able to diagnose and repair code P0222 in a 2010 Ford Fusion by following repair guides and using appropriate diagnostic equipment.

10. How long does it typically take to repair OBDII code P0222 in a 2010 Ford Fusion?

The time to repair code P0222 in a 2010 Ford Fusion can vary based on the specific cause of the issue and the complexity of the repair. It may take anywhere from a few hours to a full day to complete the repair.