P0222 2009 Toyota Prius Code - Throttle/Pedal Position Sensor/Switch 'B' Circuit - Low Input
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0222 2009 Toyota Prius indicates Throttle/Pedal Position Sensor/Switch 'B' Circuit - Low Input.
- Common causes
- Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0222 2009 Toyota Prius Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM) In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P0222 2009 Toyota Prius?
- Faulty Throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor poor electrical connection
How to Fix the DTC P0222 2009 Toyota Prius?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0222 2009 Toyota Prius code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0222 2009 Toyota Prius code?
Need more information on how to fix the P0222 2009 Toyota Prius code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0222 2009 Toyota Prius code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0222 2009 Toyota Prius Code
What are the common symptoms of OBDII code P0222 in a 2009 Toyota Prius?
Common symptoms of OBDII code P0222 in a 2009 Toyota Prius include reduced engine power, acceleration hesitation, and the vehicle going into limp mode.
What are the possible causes of OBDII code P0222 in a 2009 Toyota Prius?
Possible causes of OBDII code P0222 in a 2009 Toyota Prius include a faulty throttle position sensor, damaged wiring or connectors in the throttle position sensor circuit, or a problem with the engine control module.
How can I diagnose the throttle position sensor/sensor switch 'B' circuit for low input in my 2009 Toyota Prius?
To diagnose the throttle position sensor/switch 'B' circuit for low input in a 2009 Toyota Prius, you can use a scan tool to read the trouble code, visually inspect the throttle position sensor and its wiring, and perform a voltage test on the sensor.
What steps can I take to repair OBDII code P0222 in my 2009 Toyota Prius?
To repair OBDII code P0222 in a 2009 Toyota Prius, you may need to replace the throttle position sensor, repair any damaged wiring or connectors in the circuit, or reprogram the engine control module if necessary.
Is it safe to continue driving my 2009 Toyota Prius with OBDII code P0222?
It is not recommended to continue driving your 2009 Toyota Prius with OBDII code P0222, as it can lead to further damage to the engine or other components. It's best to address the issue promptly to avoid potential safety hazards.
Can a DIY enthusiast without much experience fix OBDII code P0222 in a 2009 Toyota Prius?
While some DIY enthusiasts may be able to tackle the repair for OBDII code P0222 in a 2009 Toyota Prius, it's recommended to have some experience with automotive repairs, as dealing with electronic components and sensors can be challenging.
How much does it typically cost to repair OBDII code P0222 in a 2009 Toyota Prius?
The cost to repair OBDII code P0222 in a 2009 Toyota Prius can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor at a repair shop.
Will resetting the OBDII code P0222 in my 2009 Toyota Prius make the issue go away?
Resetting the OBDII code P0222 in a 2009 Toyota Prius may temporarily clear the code, but it will not fix the underlying issue causing the code to appear. It's important to diagnose and repair the root cause of the problem.
Discuss the causes and fixes for P0222 2009 Toyota Prius OBDII Code
Code P0222 2009 Toyota Prius comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
