P0222 2009 Toyota Camry Code - Throttle/Pedal Position Sensor/Switch 'B' Circuit - Low Input
Quick Answer
The TP sensor is mounted on the throttle body, and detects the opening angle of the throttle valve. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0222 2009 Toyota Camry indicates Throttle/Pedal Position Sensor/Switch 'B' Circuit - Low Input.
- Common causes
- Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0222 2009 Toyota Camry Description
As the valve closes, the sensor output voltage decreases and as the valve opens, the sensor output voltage increases. The ECM calculates the throttle valve opening angle according to these signals and controls the throttle actuator in response to driver inputs. These signals are also used in calculations such as air-fuel ratio correction, power increase correction and fuel-cut control.
What are the Possible Causes of the DTC P0222 2009 Toyota Camry?
- Faulty Throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor poor electrical connection
- ECM
How to Fix the DTC P0222 2009 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0222 2009 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0222 2009 Toyota Camry code?
Need more information on how to fix the P0222 2009 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0222 2009 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0222 2009 Toyota Camry Code
1. What does the OBDII code P0222 mean on a 2009 Toyota Camry?
The P0222 code indicates that the Engine Control Module (ECM) has detected a low voltage input from the Throttle/Pedal Position Sensor/Switch 'B'.
2. What are common symptoms of code P0222 in a 2009 Toyota Camry?
Symptoms include engine stalling or rough idling, reduced fuel efficiency, and the car might go into limp mode to prevent further damage.
3. What causes the P0222 code to appear on a 2009 Toyota Camry?
Common causes include faulty throttle position sensor, poor electrical connections at the throttle position sensor, or a damaged throttle body.
4. How can I fix the P0222 code in a 2009 Toyota Camry?
Repairing this code may involve replacing the throttle position sensor, repairing any damaged wires or connectors, or cleaning the throttle body to ensure proper operation.
5. Is it safe to drive a 2009 Toyota Camry with a P0222 code?
While you may be able to drive for a short distance, it's advisable not to drive the car extensively as it can lead to additional issues like engine misfires or the vehicle entering limp mode.
6. How do I diagnose the Throttle/Pedal Position Sensor/Switch 'B' on a 2009 Toyota Camry for issues related to code P0222?
Diagnosis typically involves using an OBDII scanner to confirm the code, followed by a visual inspection of the throttle position sensor and associated wiring. A multimeter can be used to verify the sensor's voltage output.
7. What tools are needed to resolve an OBDII code P0222 on a 2009 Toyota Camry?
You'll need an OBDII scanner, a multimeter for electrical testing, and basic hand tools for removing and replacing the sensor or wiring.
8. Can a faulty throttle body cause a P0222 code on a 2009 Toyota Camry?
Yes, a faulty or dirty throttle body can cause erratic signals from the throttle position sensor, leading to a P0222 code. Cleaning or replacing the throttle body can sometimes resolve this issue.
9. What is the difference between Throttle/Pedal Position Sensor/Switch 'B' and 'A'?
Typically, 'A' and 'B' refer to different parts of the sensor system or different sensors altogether, providing redundancy and more precise data to the vehicle's ECM for better throttle control.
10. How much does it typically cost to fix a P0222 code on a 2009 Toyota Camry?
The cost can vary widely depending on the specific cause. Sensor replacement might range from $150 to $300, while more involved repairs like wiring or throttle body replacement could cost more, depending on labor rates and parts pricing.
Discuss the causes and fixes for P0222 2009 Toyota Camry OBDII Code
Code P0222 2009 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
