P0222 2009 Ford Fusion Code - Throttle Pedal Position Sensor Switch B Circuit Low
Quick Answer
The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the Powertrain Control Module (PCM) indicating a low voltage, or open circuit. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0222 2009 Ford Fusion indicates Throttle Pedal Position Sensor Switch B Circuit Low.
- Common causes
- Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0222 2009 Ford Fusion Description
What are the Possible Causes of the DTC P0222 2009 Ford Fusion?
- Faulty Throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor poor electrical connection
How to Fix the DTC P0222 2009 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0222 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0222 2009 Ford Fusion code?
Need more information on how to fix the P0222 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0222 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0222 2009 Ford Fusion Code
1. What are the common symptoms of OBDII code P0222 in a 2009 Ford Fusion?
The common symptoms of OBDII code P0222 in a 2009 Ford Fusion include reduced engine power, hesitation or stalling, and the vehicle going into "limp mode."
2. What does the OBDII code P0222 indicate in a 2009 Ford Fusion?
OBDII code P0222 in a 2009 Ford Fusion indicates an issue with the Throttle Pedal Position Sensor Switch B Circuit registering a low voltage.
3. What are the possible causes of OBDII code P0222 in a 2009 Ford Fusion?
Possible causes of OBDII code P0222 in a 2009 Ford Fusion include a faulty throttle pedal position sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine control module (ECM).
4. How can I diagnose the Throttle Pedal Position Sensor Switch B Circuit Low issue in my 2009 Ford Fusion?
You can diagnose the Throttle Pedal Position Sensor Switch B Circuit Low issue in your 2009 Ford Fusion by using an OBDII scanner to read the trouble code, inspecting the throttle pedal position sensor and its wiring, and testing the sensor's voltage output.
5. Can I drive my 2009 Ford Fusion with OBDII code P0222?
It is not recommended to drive your 2009 Ford Fusion with OBDII code P0222 as it can lead to unsafe driving conditions due to reduced engine power and potential stalling.
6. How can I repair OBDII code P0222 in my 2009 Ford Fusion?
To repair OBDII code P0222 in your 2009 Ford Fusion, you may need to replace the throttle pedal position sensor, repair any damaged wiring or connectors, or reprogram the engine control module (ECM) if necessary.
7. Will resetting the OBDII code P0222 in my 2009 Ford Fusion make the issue go away?
Resetting the OBDII code P0222 in your 2009 Ford Fusion may temporarily clear the code, but if the underlying issue with the Throttle Pedal Position Sensor Switch B Circuit Low is not addressed, the code is likely to reappear.
8. Is it safe to continue driving if the OBDII code P0222 light is flashing in my 2009 Ford Fusion?
If the OBDII code P0222 light is flashing in your 2009 Ford Fusion, it indicates a severe issue that requires immediate attention. It is not safe to continue driving, and you should have the vehicle inspected as soon as possible.
9. Can a DIY enthusiast fix OBDII code P0222 in a 2009 Ford Fusion?
A DIY enthusiast with the necessary tools and knowledge about automotive repairs may be able to fix OBDII code P0222 in a 2009 Ford Fusion, especially if it involves replacing the throttle pedal position sensor or repairing wiring issues.
10. How much does it cost to repair OBDII code P0222 in a 2009 Ford Fusion at a mechanic?
The cost to repair OBDII code P0222 in a 2009 Ford Fusion at a mechanic can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
Discuss the causes and fixes for P0222 2009 Ford Fusion OBDII Code
Code P0222 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
