AutoCodes – Toyota – P0222 2008 Toyota Camry

P0222 2008 Toyota Camry Code - Throttle/Pedal Position Sensor/Switch 'B' Circuit - Low Input

Quick Answer

The TP sensor is mounted on the throttle body, and detects the opening angle of the throttle valve. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0222 2008 Toyota Camry indicates Throttle/Pedal Position Sensor/Switch 'B' Circuit - Low Input.
Common causes: Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,613

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0222 2008 Toyota Camry Description

The TP sensor is mounted on the throttle body, and detects the opening angle of the throttle valve. This sensor is a non-contact type. It uses Hall-effect elements in order to yield accurate signals even in extreme driving conditions, such as at high speeds as well as very low speeds. The TP sensor has two sensor circuits which each transmits a signal, VTA1 and VTA2. VTA1 is used to detect the throttle valve angle and VTA2 is used to detect malfunctions in VTA1. The sensor signal voltages vary between 0 V and 5 V in proportion to the throttle valve opening angle, and are transmitted to the VTA terminals of the ECM.
As the valve closes, the sensor output voltage decreases and as the valve opens, the sensor output voltage increases. The ECM calculates the throttle valve opening angle according to these signals and controls the throttle actuator in response to driver inputs. These signals are also used in calculations such as air-fuel ratio correction, power increase correction and fuel-cut control.

OBDII Code P0222 2008 Toyota Camry - Throttle/Pedal Position Sensor/Switch 'B' Circuit - Low Input - AutoCodes.com — P0222 2008 Toyota Camry Code - Throttle/Pedal Position Sensor/Switch 'B' Circuit - Low Input

What does this mean?

What are the Possible Causes of the DTC P0222 2008 Toyota Camry?

Faulty Throttle position sensor
Throttle position sensor harness is open or shorted
Throttle position sensor poor electrical connection
ECM

How to Fix the DTC P0222 2008 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0222 2008 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0222 2008 Toyota Camry code?

Need more information on how to fix the P0222 2008 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0222 2008 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0222 2008 Toyota Camry Code

1. What are the common symptoms of OBDII code P0222 on a 2008 Toyota Camry?

- Common symptoms include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into limp mode.

2. What does the Throttle/Pedal Position Sensor/Switch 'B' Circuit - Low Input code P0222 indicate?

- The code P0222 indicates that the voltage signal from the throttle pedal position sensor or switch 'B' is lower than the specified range.

3. What are the possible causes of OBDII code P0222 on a 2008 Toyota Camry?

- Possible causes include a faulty throttle pedal position sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine control module (ECM).

4. How can I diagnose the Throttle/Pedal Position Sensor/Switch 'B' Circuit - Low Input code P0222 on my 2008 Toyota Camry?

- A diagnostic scan tool can help identify the code and pinpoint the exact cause. Checking the throttle pedal sensor's voltage output and inspecting the wiring for damage are common diagnostic steps.

5. Can I continue driving my 2008 Toyota Camry with OBDII code P0222?

- It is not recommended to continue driving with code P0222 as it can cause further damage to the vehicle and affect performance. It is best to address the issue promptly.

6. How can I repair OBDII code P0222 on my 2008 Toyota Camry?

- Repair options include replacing the throttle pedal position sensor, repairing or replacing damaged wiring or connectors, and resetting the ECM to clear the code.

7. Will resetting the check engine light resolve OBDII code P0222 on a 2008 Toyota Camry?

- Resetting the check engine light may temporarily clear the code, but it will likely reappear if the underlying issue causing P0222 is not addressed.

8. Can a DIY enthusiast fix OBDII code P0222 on a 2008 Toyota Camry?

- Depending on your mechanical skills and access to tools, you may be able to replace the throttle pedal position sensor or repair wiring yourself. However, professional diagnosis is recommended for accurate repair.

9. How much does it cost to repair OBDII code P0222 on a 2008 Toyota Camry at a mechanic?

- The cost of repairing P0222 can vary depending on the exact cause, labor rates, and parts needed. It is advisable to get a diagnostic assessment from a mechanic for an accurate cost estimate.

10. Is OBDII code P0222 a common issue with 2008 Toyota Camry vehicles?

- While it may not be as common as some other codes, P0222 can still occur in 2008 Toyota Camry vehicles due to sensor failures or wiring issues. Regular maintenance and monitoring can help prevent such issues.