P0222 2007 Nissan Maxima Code - Throttle Position Sensor/Switch 2 Circuit Low Input
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0222 2007 Nissan Maxima indicates Throttle Position Sensor/Switch 2 Circuit Low Input.
- Common causes
- Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0222 2007 Nissan Maxima Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM) In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P0222 2007 Nissan Maxima?
- Faulty Throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor poor electrical connection
- Faulty accelerator pedal position sensor
How to Fix the DTC P0222 2007 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0222 2007 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0222 2007 Nissan Maxima code?
Need more information on how to fix the P0222 2007 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0222 2007 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0222 2007 Nissan Maxima Code
1. What does OBDII code P0222 mean for a 2007 Nissan Maxima?
The code P0222 indicates a potential issue with the Throttle Position Sensor/Switch 2 Circuit, specifically signaling a low input.
2. What are the common symptoms of a P0222 error code in a 2007 Nissan Maxima?
Common symptoms of a P0222 code may include reduced engine power, poor acceleration, rough idling, and in some cases, the vehicle may even go into limp mode.
3. What are the possible causes of a P0222 code on a 2007 Nissan Maxima?
Possible causes of a P0222 code include a faulty throttle position sensor, damaged wiring or connectors in the throttle position sensor circuit, or issues with the engine control module (ECM).
4. How can I diagnose a P0222 error code on my 2007 Nissan Maxima?
Diagnosing a P0222 code typically involves using a scan tool to read the code, checking the throttle position sensor's voltage output, inspecting the sensor and its wiring for damage, and testing the ECM's functionality.
5. Can I still drive my 2007 Nissan Maxima with a P0222 code?
It is not recommended to drive your vehicle with a P0222 code as it can lead to further damage and safety issues. It is best to address the underlying problem promptly.
6. How can I repair a P0222 error code on my 2007 Nissan Maxima?
Repairing a P0222 code may involve replacing the throttle position sensor, repairing damaged wiring or connectors, or reprogramming the ECM. It is recommended to consult a professional mechanic for an accurate diagnosis and repair.
7. Will resetting the error code make the P0222 issue go away in my 2007 Nissan Maxima?
Resetting the error code may temporarily clear the warning light, but it will not fix the underlying problem causing the P0222 code. Proper diagnosis and repair are necessary to resolve the issue.
8. How much does it cost to fix a P0222 error code on a 2007 Nissan Maxima?
The cost of fixing a P0222 code can vary depending on the specific cause of the issue, the parts needed for repair, and labor costs. It is advisable to get a few quotes from mechanics to determine the exact cost.
9. Can a P0222 error code on a 2007 Nissan Maxima cause other problems if left unaddressed?
If left unaddressed, a P0222 code can potentially lead to poor engine performance, reduced fuel efficiency, and further damage to the engine components. It is crucial to address the issue promptly.
10. Is it possible to prevent a P0222 error code from occurring in my 2007 Nissan Maxima?
Regular maintenance, such as checking and cleaning the throttle position sensor, inspecting wiring for damage, and addressing any engine performance issues promptly, can help prevent a P0222 code from occurring.
Discuss the causes and fixes for P0222 2007 Nissan Maxima OBDII Code
Code P0222 2007 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
