AutoCodesFord – P0222 2007 Ford Fusion

P0222 2007 Ford Fusion Code - Throttle Pedal Position Sensor Switch B Circuit Low

Quick Answer

The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the Powertrain Control Module (PCM) indicating a low voltage, or open circuit. Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0222 2007 Ford Fusion indicates Throttle Pedal Position Sensor Switch B Circuit Low.
Common causes
Common causes include Faulty Throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,533
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0222 2007 Ford Fusion Description

The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the Powertrain Control Module (PCM) indicating a low voltage, or open circuit.
OBDII Code P0222 2007 Ford Fusion - Throttle Pedal Position Sensor Switch B Circuit Low - AutoCodes.com
P0222 2007 Ford Fusion Code - Throttle Pedal Position Sensor Switch B Circuit Low

What are the Possible Causes of the DTC P0222 2007 Ford Fusion?

  • Faulty Throttle position sensor
  • Throttle position sensor harness is open or shorted
  • Throttle position sensor poor electrical connection

How to Fix the DTC P0222 2007 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0222 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0222 2007 Ford Fusion code?

Need more information on how to fix the P0222 2007 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0222 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0222 2007 Ford Fusion Code

1. What does the OBDII code P0222 mean on a 2007 Ford Fusion?

P0222 indicates that the Throttle Pedal Position Sensor (TPPS) Switch B Circuit is reading a voltage that is lower than the expected range.

2. What are the common symptoms of code P0222 in a 2007 Ford Fusion?

Symptoms may include reduced engine power, poor acceleration, the engine going into limp mode, or the Check Engine Light being illuminated.

3. What causes the P0222 code to appear in a 2007 Ford Fusion?

Common causes include a faulty throttle pedal position sensor, damaged wiring or connectors in the sensor circuit, or a malfunctioning throttle body.

4. Can I drive my 2007 Ford Fusion with a P0222 code?

While the car may still be drivable, it could experience reduced performance or limp mode, making it unsafe in certain situations. It's best to address the issue promptly.

5. How do I diagnose the P0222 code on a 2007 Ford Fusion?

Start by inspecting the throttle pedal position sensor and its wiring for damage. Use a multimeter to test the sensor’s voltage output and check for proper grounding.

6. What tools are needed to troubleshoot the P0222 code?

You’ll need an OBDII scanner, a multimeter, and possibly wiring diagrams for the throttle pedal position sensor circuit.

7. How do I fix the P0222 code on a 2007 Ford Fusion?

Repairs may involve replacing the throttle pedal position sensor, repairing damaged wiring, or cleaning and inspecting the throttle body.

8. What is the function of the Throttle Pedal Position Sensor in a 2007 Ford Fusion?

The sensor monitors the position of the accelerator pedal and sends a corresponding voltage signal to the engine control module (ECM) to regulate throttle response.

9. Can a dirty throttle body cause a P0222 code on a 2007 Ford Fusion?

While uncommon, a dirty or malfunctioning throttle body can indirectly contribute to this code. Cleaning the throttle body may help if it’s sticking or not operating properly.

10. How much does it cost to repair a P0222 code on a 2007 Ford Fusion?

Repair costs vary, but replacing the throttle pedal position sensor typically costs between $100 and $300, including parts and labor. Wiring or throttle body repairs can add to the cost.

Discuss the causes and fixes for P0222 2007 Ford Fusion OBDII Code

Code P0222 2007 Ford Fusion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play