P0221 2012 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'B' Circuit
Quick Answer
The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the Powertrain Control Module (PCM) indicating an out of range in either the closed or wide open throttle (WOT) modes. Common causes include Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection, Faulty Throttle Position Sensor (TPS). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0221 2012 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'B' Circuit .
- Common causes
- Common causes include Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection, Faulty Throttle Position Sensor (TPS).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0221 2012 Ford Fusion Description
What are the Possible Causes of the DTC P0221 2012 Ford Fusion?
- Throttle Position Sensor (TPS) harness is open or shorted
- Throttle Position Sensor (TPS) circuit poor electrical connection
- Faulty Throttle Position Sensor (TPS)
- Fault Electric Throttle Control Actuator (or Throttle Body Motor)
- Accelerator Pedal Position Sensor (APP)
How to Fix the DTC P0221 2012 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0221 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0221 2012 Ford Fusion code?
Need more information on how to fix the P0221 2012 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0221 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0221 2012 Ford Fusion Code
1. What are the common symptoms of OBDII code P0221 on a 2012 Ford Fusion?
- Common symptoms include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into limp mode.
2. What does the OBDII code P0221 for a 2012 Ford Fusion indicate?
- The code P0221 indicates an issue with the Throttle/Pedal Position Sensor/Switch 'B' Circuit.
3. What are the possible causes of OBDII code P0221 on a 2012 Ford Fusion?
- Possible causes include a faulty throttle position sensor, damaged wiring or connectors, or issues with the engine control module.
4. How can I diagnose the cause of OBDII code P0221 on my 2012 Ford Fusion?
- Use a scan tool to check for the specific code, visually inspect the wiring and connectors, and test the throttle position sensor for proper operation.
5. Is it safe to drive with OBDII code P0221 on a 2012 Ford Fusion?
- It is not recommended to drive with this code as it can lead to performance issues and potentially unsafe driving conditions.
6. Can I repair OBDII code P0221 on a 2012 Ford Fusion myself?
- Depending on your experience and tools, you may be able to replace the throttle position sensor or repair wiring issues yourself. Otherwise, it's best to consult a professional.
7. How much does it typically cost to repair OBDII code P0221 on a 2012 Ford Fusion?
- The cost of repairs can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
8. Are there any preventive measures to avoid OBDII code P0221 on a 2012 Ford Fusion?
- Regularly inspecting and maintaining the throttle position sensor, wiring, and connectors can help prevent issues that trigger this code.
9. Will resetting the OBDII code P0221 on a 2012 Ford Fusion make it go away permanently?
- Resetting the code may temporarily turn off the check engine light, but if the underlying issue is not fixed, the code is likely to return.
10. How urgent is it to address OBDII code P0221 on a 2012 Ford Fusion?
- It is recommended to address this code promptly to prevent further damage to the vehicle and ensure safe and reliable operation.
Discuss the causes and fixes for P0221 2012 Ford Fusion OBDII Code
Code P0221 2012 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
