P0221 2011 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'B' Circuit
Quick Answer
The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the Powertrain Control Module (PCM) indicating an out of range in either the closed or wide open throttle (WOT) modes. Common causes include Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection, Faulty Throttle Position Sensor (TPS). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0221 2011 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'B' Circuit .
- Common causes
- Common causes include Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection, Faulty Throttle Position Sensor (TPS).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0221 2011 Ford Fusion Description
What are the Possible Causes of the DTC P0221 2011 Ford Fusion?
- Throttle Position Sensor (TPS) harness is open or shorted
- Throttle Position Sensor (TPS) circuit poor electrical connection
- Faulty Throttle Position Sensor (TPS)
- Fault Electric Throttle Control Actuator (or Throttle Body Motor)
- Accelerator Pedal Position Sensor (APP)
How to Fix the DTC P0221 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0221 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0221 2011 Ford Fusion code?
Need more information on how to fix the P0221 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0221 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0221 2011 Ford Fusion Code
1. What are the common symptoms of OBDII code P0221 in a 2011 Ford Fusion?
The common symptoms of OBDII code P0221 in a 2011 Ford Fusion include issues with acceleration, reduced engine power, stalling, and the illumination of the Check Engine light.
2. What does OBDII code P0221 for Throttle/Pedal Position Sensor/Switch 'B' Circuit mean in a 2011 Ford Fusion?
OBDII code P0221 in a 2011 Ford Fusion indicates a problem with the Throttle/Pedal Position Sensor/Switch 'B' Circuit, which is responsible for detecting the position of the throttle or pedal.
3. What are the possible causes of OBDII code P0221 in a 2011 Ford Fusion?
The possible causes of OBDII code P0221 in a 2011 Ford Fusion include a faulty throttle position sensor, damaged wiring or connectors, a defective pedal position sensor, or issues with the engine control module.
4. How can I diagnose OBDII code P0221 in my 2011 Ford Fusion?
Diagnosing OBDII code P0221 in a 2011 Ford Fusion involves using a diagnostic scanner to retrieve the code, checking the throttle and pedal position sensors for proper operation, inspecting wiring and connectors for damage, and testing the circuitry for faults.
5. Can I still drive my 2011 Ford Fusion with OBDII code P0221 present?
It is not recommended to drive your 2011 Ford Fusion with OBDII code P0221 present, as it can lead to poor engine performance, safety hazards, and potential damage to other components.
6. How can I repair OBDII code P0221 in my 2011 Ford Fusion?
Repairing OBDII code P0221 in a 2011 Ford Fusion typically involves replacing the faulty throttle or pedal position sensor, repairing damaged wiring or connectors, or addressing any issues with the engine control module.
7. Are there any DIY tips for fixing OBDII code P0221 in a 2011 Ford Fusion?
While some basic troubleshooting steps can be taken, it is recommended to consult a professional mechanic for proper diagnosis and repair of OBDII code P0221 in a 2011 Ford Fusion to ensure the issue is resolved correctly.
8. How much does it cost to repair OBDII code P0221 in a 2011 Ford Fusion?
The cost of repairing OBDII code P0221 in a 2011 Ford Fusion can vary depending on the specific cause of the issue, parts needed for replacement, and labor costs. It is advisable to obtain quotes from different repair shops for accurate pricing.
9. Can resetting the OBDII code P0221 in my 2011 Ford Fusion make it go away?
Resetting the OBDII code P0221 in a 2011 Ford Fusion may temporarily clear the code, but it will likely return if the underlying issue with the Throttle/Pedal Position Sensor/Switch 'B' Circuit is not addressed and resolved.
10. How often does OBDII code P0221 occur in a 2011 Ford Fusion?
OBDII code P0221 related to the Throttle/Pedal Position Sensor/Switch 'B' Circuit can occur infrequently in a 2011 Ford Fusion, but it is essential to address it promptly to avoid potential drivability issues and further damage to the vehicle.
Discuss the causes and fixes for P0221 2011 Ford Fusion OBDII Code
Code P0221 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
