P0221 2008 Ford Fusion Code - Throttle/Pedal Position Sensor/Switch 'B' Circuit
Quick Answer
The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the Powertrain Control Module (PCM) indicating an out of range in either the closed or wide open throttle (WOT) modes. Common causes include Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection, Faulty Throttle Position Sensor (TPS). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0221 2008 Ford Fusion indicates Throttle/Pedal Position Sensor/Switch 'B' Circuit .
- Common causes
- Common causes include Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection, Faulty Throttle Position Sensor (TPS).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0221 2008 Ford Fusion Description
What are the Possible Causes of the DTC P0221 2008 Ford Fusion?
- Throttle Position Sensor (TPS) harness is open or shorted
- Throttle Position Sensor (TPS) circuit poor electrical connection
- Faulty Throttle Position Sensor (TPS)
- Fault Electric Throttle Control Actuator (or Throttle Body Motor)
- Accelerator Pedal Position Sensor (APP)
How to Fix the DTC P0221 2008 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0221 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0221 2008 Ford Fusion code?
Need more information on how to fix the P0221 2008 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0221 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0221 2008 Ford Fusion Code
1. What are the common symptoms of OBDII code P0221 in a 2008 Ford Fusion?
- Common symptoms include engine stalling, lack of power, surging while driving, and the vehicle going into limp mode.
2. What causes the Throttle/Pedal Position Sensor/Switch 'B' Circuit issue in a 2008 Ford Fusion?
- The most common causes of P0221 include a faulty throttle position sensor, damaged wiring or connectors, or a problem with the throttle body itself.
3. How can I diagnose the Throttle/Pedal Position Sensor/Switch 'B' Circuit issue in my 2008 Ford Fusion?
- A thorough diagnostic scan using an OBDII scanner can help pinpoint the exact cause of the problem. Checking the sensor's wiring and connectors for damage is also recommended.
4. Can I still drive my 2008 Ford Fusion with OBDII code P0221?
- It is not recommended to drive the vehicle with this code present, as it can lead to unsafe driving conditions and potential damage to other components.
5. How can I repair the Throttle/Pedal Position Sensor/Switch 'B' Circuit issue in my 2008 Ford Fusion?
- Repair options include replacing the throttle position sensor, repairing any damaged wiring or connectors, or cleaning and inspecting the throttle body for any issues.
6. Will resetting the OBDII code P0221 in my 2008 Ford Fusion make the issue go away?
- Resetting the code may temporarily clear the warning light, but it will not fix the underlying issue causing the P0221 code to appear.
7. How much does it cost to fix the Throttle/Pedal Position Sensor/Switch 'B' Circuit problem in a 2008 Ford Fusion?
- The cost of repair can vary depending on the exact cause of the issue, but it typically ranges from $100 to $300 for parts and labor.
8. Can a DIY enthusiast fix the OBDII code P0221 in a 2008 Ford Fusion?
- Depending on the level of expertise, a DIY enthusiast may be able to replace the throttle position sensor or check for damaged wiring, but more complex repairs may require professional help.
9. Is the Throttle/Pedal Position Sensor/Switch 'B' Circuit issue a common problem in 2008 Ford Fusion vehicles?
- While not extremely common, issues with the throttle position sensor and circuit can occur in 2008 Ford Fusion models, especially as the vehicle ages.
10. How often should I have the throttle system inspected in my 2008 Ford Fusion to prevent OBDII code P0221 from occurring?
- It is recommended to have the throttle system inspected during regular maintenance intervals or if you notice any symptoms of throttle-related issues to prevent the occurrence of OBDII code P0221.
Discuss the causes and fixes for P0221 2008 Ford Fusion OBDII Code
Code P0221 2008 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
