AutoCodes – KIA – P0220 KIA

P0220 KIA Code - Throttle Position Sensor / Pedal Position Sensor/Switch

Quick Answer

Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. Common causes include Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection, Faulty Throttle Position Sensor (TPS). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0220 KIA indicates Throttle Position Sensor / Pedal Position Sensor/Switch .
Common causes: Common causes include Throttle Position Sensor (TPS) harness is open or shorted, Throttle Position Sensor (TPS) circuit poor electrical connection, Faulty Throttle Position Sensor (TPS).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 13,327

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0220 KIA Description

Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor (TPS), etc. The throttle position sensor responds to the throttle valve movement.
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM) In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.

OBDII Code P0220 KIA - Throttle Position Sensor / Pedal Position Sensor/Switch - AutoCodes.com — P0220 KIA Code - Throttle Position Sensor / Pedal Position Sensor/Switch

What does this mean?

What are the Possible Causes of the DTC P0220 KIA?

Throttle Position Sensor (TPS) harness is open or shorted
Throttle Position Sensor (TPS) circuit poor electrical connection
Faulty Throttle Position Sensor (TPS)
Fault Electric Throttle Control Actuator (or Throttle Body Motor)
Accelerator Pedal Position Sensor (APP)

How to Fix the DTC P0220 KIA?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0220 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0220 KIA code?

Need more information on how to fix the P0220 KIA code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0220 KIA code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0220 KIA Code

What does the OBDII code P0220 mean on a Kia?

P0220 indicates a problem with the Throttle Position Sensor (TPS) or Pedal Position Sensor/Switch B circuit on your Kia, which helps monitor the throttle or accelerator pedal position.

What are the common symptoms of code P0220 in a Kia?

Symptoms may include poor acceleration, engine stalling, rough idling, limited throttle response, or the activation of the Check Engine Light.

What causes the P0220 code to appear on a Kia?

Common causes include a faulty Throttle Position Sensor, damaged Pedal Position Sensor, wiring or connector issues, or a malfunctioning Engine Control Module (ECM).

Can I drive my Kia with a P0220 code?

Driving with a P0220 code is not recommended, as it may lead to unsafe throttle control or stalling, which could pose a safety risk.

How do I diagnose a P0220 code on a Kia?

Start by inspecting the TPS and Pedal Position Sensor wiring and connectors for damage or corrosion. Use a multimeter to test sensor voltage and continuity. Scanning live data with an OBDII tool can also help pinpoint the issue.

What tools are needed to fix the P0220 code on a Kia?

You may need an OBDII scanner, a multimeter, and basic hand tools like screwdrivers and wrenches to diagnose and repair the issue.

How much does it cost to repair a P0220 code on a Kia?

The cost will vary depending on the problem. Replacing a Throttle Position Sensor or Pedal Position Sensor typically costs between $100 and $300, including parts and labor.

Can a dirty throttle body cause a P0220 code in a Kia?

While less common, a dirty or clogged throttle body can sometimes cause issues with throttle position readings and trigger the P0220 code.

How is the P0220 code fixed on a Kia?

The fix usually involves repairing or replacing the faulty Throttle Position Sensor or Pedal Position Sensor, addressing wiring or connector issues, or reprogramming the ECM if needed.

How do I prevent a P0220 code from occurring in the future?

Regularly inspect and maintain the throttle body, sensors, and wiring. Avoid driving in conditions that can lead to excessive wiring corrosion, and address Check Engine Light issues promptly.