AutoCodes – Ford – P0219 2012 Ford Fusion

P0219 2012 Ford Fusion Code - Engine Overspeed Condition

Quick Answer

Indicates the vehicle has been operated in a manner which caused the engine speed to exceed a calibrated limit. Common causes include Wheel slippage (water, ice, mud, and snow), Excessive engine RPM in NEUTRAL or operated in the wrong transmission gear. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0219 2012 Ford Fusion indicates Engine Overspeed Condition.
Common causes: Common causes include Wheel slippage (water, ice, mud, and snow), Excessive engine RPM in NEUTRAL or operated in the wrong transmission gear.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,293

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0219 2012 Ford Fusion Description

Indicates the vehicle has been operated in a manner which caused the engine speed to exceed a calibrated limit. The engine RPM is continuously monitored and evaluated by the PCM. The DTC is set when the RPM exceeds the calibrated limit set within the PCM. For additional information on the engine RPM limiter, refer to Section 1, Electronic Engine Control (EC) System Powertrain Control Software.

OBDII Code P0219 2012 Ford Fusion - Engine Overspeed Condition - AutoCodes.com — P0219 2012 Ford Fusion Code - Engine Overspeed Condition

What does this mean?

What are the Possible Causes of the DTC P0219 2012 Ford Fusion?

Wheel slippage (water, ice, mud, and snow)
Excessive engine RPM in NEUTRAL or operated in the wrong transmission gear

How to Fix the DTC P0219 2012 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0219 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0219 2012 Ford Fusion code?

Need more information on how to fix the P0219 2012 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0219 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0219 2012 Ford Fusion Code

1. What is the OBDII code P0219 for a 2012 Ford Fusion?

The OBDII code P0219 for a 2012 Ford Fusion indicates an Engine Overspeed Condition.

2. What are the common symptoms of OBDII code P0219 in a 2012 Ford Fusion?

Common symptoms of OBDII code P0219 in a 2012 Ford Fusion include engine misfires, hesitation or loss of power, and potential stalling.

3. What are the possible causes of OBDII code P0219 in a 2012 Ford Fusion?

Possible causes of OBDII code P0219 in a 2012 Ford Fusion include a faulty engine control module (ECM), issues with the throttle position sensor (TPS), or a mechanical problem with the engine.

4. How can I diagnose OBDII code P0219 in my 2012 Ford Fusion?

Diagnosing OBDII code P0219 in a 2012 Ford Fusion involves using an OBDII scanner to retrieve the code, checking for any related codes, and then inspecting the throttle position sensor, engine control module, and engine components for any issues.

5. What are some repair tips for fixing OBDII code P0219 in a 2012 Ford Fusion?

Repair tips for fixing OBDII code P0219 in a 2012 Ford Fusion may include replacing a faulty throttle position sensor, reprogramming the engine control module, or addressing any mechanical problems causing the overspeed condition.

6. Can driving with OBDII code P0219 in a 2012 Ford Fusion cause further damage?

Driving with OBDII code P0219 in a 2012 Ford Fusion can potentially cause further damage to the engine if the overspeed condition is not addressed promptly. It is recommended to have the issue diagnosed and repaired as soon as possible.

7. Is it safe to continue driving my 2012 Ford Fusion with OBDII code P0219?

It is not recommended to continue driving your 2012 Ford Fusion with OBDII code P0219, as it can lead to engine performance issues and potentially unsafe driving conditions. It is best to address the problem promptly.

8. How much does it typically cost to repair OBDII code P0219 in a 2012 Ford Fusion?

The cost to repair OBDII code P0219 in a 2012 Ford Fusion can vary depending on the specific cause of the issue and the labor rates of the repair shop. It is advisable to obtain quotes from different mechanics for an accurate estimate.

9. Can OBDII code P0219 in a 2012 Ford Fusion be a recurring issue?

OBDII code P0219 in a 2012 Ford Fusion can potentially be a recurring issue if the root cause of the overspeed condition is not properly addressed during repairs. It is crucial to ensure that all related components are thoroughly inspected and repaired to prevent future occurrences.

10. Is it possible to reset OBDII code P0219 in a 2012 Ford Fusion without fixing the underlying issue?

While it is possible to clear the OBDII code P0219 in a 2012 Ford Fusion using an OBDII scanner, it is not recommended to do so without addressing the underlying issue causing the engine overspeed condition. Simply clearing the code without fixing the problem may lead to further complications down the line.