AutoCodesLincoln – P0214 Lincoln

P0214 Lincoln Code - Cold Start Injector 2 Malfunction

Quick Answer

This fault code is stored in the Engine Control Module (ECM) when the injector control circuit does not behave as expected. Common causes include Faulty Cold Start Injector 2, Cold Start Injector 2 harness is open or shorted, Cold Start Injector 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0214 Lincoln indicates Cold Start Injector 2 Malfunction.
Common causes
Common causes include Faulty Cold Start Injector 2, Cold Start Injector 2 harness is open or shorted, Cold Start Injector 2 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 359
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 23, 2021
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0214 Lincoln Description

This fault code is stored in the Engine Control Module (ECM) when the injector control circuit does not behave as expected. The ECM uses the induced voltage from the injector to indicate that the fuel injector circuit is operating correctly electrically. It does not signal the mechanical condition of the injector. When the ECM opens the ground circuit for an injector, to cease current flow, a voltage is induced into the winding. This voltage shows the electrical integrity of the injector and associated wiring. Absence of this induced voltage results in a Diagnostic Trouble Code (DTC) being stored in the ECM.
OBDII Code P0214 Lincoln - Cold Start Injector 2 Malfunction - AutoCodes.com
P0214 Lincoln Code - Cold Start Injector 2 Malfunction

What are the Possible Causes of the DTC P0214 Lincoln?

  • Faulty Cold Start Injector 2
  • Cold Start Injector 2 harness is open or shorted
  • Cold Start Injector 2 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0214 Lincoln?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0214 Lincoln code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0214 Lincoln code?

Need more information on how to fix the P0214 Lincoln code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0214 Lincoln code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0214 Lincoln Code

1. What does the OBDII code P0214 mean on a Lincoln?

P0214 indicates a malfunction in Cold Start Injector 2, which is responsible for providing extra fuel during cold engine starts.

2. What are the common symptoms of code P0214 in a Lincoln?

Symptoms may include difficulty starting the engine in cold weather, rough idle during startup, increased fuel consumption, and potentially the check engine light illuminating.

3. What could cause the P0214 code to appear?

Common causes include a faulty cold start injector, wiring issues like corrosion or damage, a malfunctioning injector control module, or a problem with the engine control unit (ECU).

4. Can I drive my Lincoln with a P0214 code?

While the vehicle may still be operable, driving with a P0214 code can lead to poor performance, difficulty starting in cold weather, and potential engine damage if left unresolved.

5. How do I diagnose a P0214 code on my Lincoln?

Diagnosis involves checking the cold start injector for proper operation, inspecting the wiring and connectors, testing the injector control circuit, and using a scan tool to monitor related data.

6. How do I fix the P0214 code on my Lincoln?

Repairs may include replacing the cold start injector, repairing damaged wiring, cleaning corroded connectors, or reprogramming/replacing the ECU if necessary.

7. Can a dirty fuel injector cause the P0214 code?

Yes, a clogged or dirty cold start injector can disrupt fuel delivery and trigger the code.

8. How much does it cost to repair a P0214 code on a Lincoln?

Repair costs vary depending on the issue, but replacing a cold start injector typically costs $150-$300, while wiring or ECU repairs could add to the expense.

9. What tools are needed to troubleshoot code P0214?

Common tools include a scan tool, multimeter, wiring diagrams, and potentially a fuel pressure gauge for injector testing.

10. Can a software update fix the P0214 code in my Lincoln?

In some cases, a software update for the ECU may resolve the issue if it’s related to programming errors or injector control logic.

Discuss the causes and fixes for P0214 Lincoln OBDII Code

Code P0214 Lincoln comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play