AutoCodes – Ford – P0214 Ford

P0214 Ford Code - Cold Start Injector 2 Malfunction

Quick Answer

This fault code is stored in the Engine Control Module (ECM) when the injector control circuit does not behave as expected. Common causes include Faulty Cold Start Injector 2, Cold Start Injector 2 harness is open or shorted, Cold Start Injector 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0214 Ford indicates Cold Start Injector 2 Malfunction.
Common causes: Common causes include Faulty Cold Start Injector 2, Cold Start Injector 2 harness is open or shorted, Cold Start Injector 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,440

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 15, 2021

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0214 Ford Description

This fault code is stored in the Engine Control Module (ECM) when the injector control circuit does not behave as expected. The ECM uses the induced voltage from the injector to indicate that the fuel injector circuit is operating correctly electrically. It does not signal the mechanical condition of the injector. When the ECM opens the ground circuit for an injector, to cease current flow, a voltage is induced into the winding. This voltage shows the electrical integrity of the injector and associated wiring. Absence of this induced voltage results in a Diagnostic Trouble Code (DTC) being stored in the ECM.

OBDII Code P0214 Ford - Cold Start Injector 2 Malfunction - AutoCodes.com — P0214 Ford Code - Cold Start Injector 2 Malfunction

What does this mean?

What are the Possible Causes of the DTC P0214 Ford?

Faulty Cold Start Injector 2
Cold Start Injector 2 harness is open or shorted
Cold Start Injector 2 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0214 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0214 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0214 Ford code?

Need more information on how to fix the P0214 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0214 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0214 Ford Code

1. What does the OBDII code P0214 mean on a Ford vehicle?

P0214 indicates a malfunction in the Cold Start Injector 2 circuit, which is responsible for helping the engine start efficiently in cold weather conditions.

2. What are the common symptoms of the P0214 code?

Symptoms may include difficulty starting the engine in cold weather, rough idling during startup, reduced engine performance, and the check engine light illuminating.

3. What causes the P0214 code to appear?

Common causes include a faulty cold start injector, damaged or corroded wiring in the injector circuit, a malfunctioning engine control module (ECM), or low fuel pressure.

4. How is the P0214 code diagnosed?

A technician will typically use an OBDII scanner to confirm the code, inspect the cold start injector and its wiring for damage, and test the circuit for proper voltage and resistance.

5. Can I drive my Ford with the P0214 code?

While the vehicle may still be drivable, it could experience poor cold-start performance. It’s best to address the issue promptly to avoid potential engine damage or worsening symptoms.

6. How do you fix the P0214 code on a Ford?

Repairs may involve replacing the faulty cold start injector, repairing or replacing damaged wiring or connectors, or addressing any ECM-related issues.

7. How much does it cost to repair the P0214 code?

The repair cost can vary depending on the specific cause, but replacing a cold start injector typically costs between $150 and $300, including parts and labor.

8. Can a dirty fuel system cause the P0214 code?

Yes, a clogged fuel injector or low fuel pressure due to a dirty fuel system can contribute to this code. Cleaning the fuel system or replacing the fuel filter might help.

9. Can a bad battery trigger the P0214 code?

A weak or failing battery can cause voltage issues that may affect the cold start injector circuit, potentially triggering the code.

10. What tools are needed to troubleshoot the P0214 code?

You’ll need an OBDII scanner, a multimeter for electrical testing, and possibly fuel pressure testing equipment to diagnose the underlying issue accurately.