P020C 2014 Chevrolet Silverado Code - Cylinder 3 Injection Timing
Quick Answer
The Engine Control Module (ECM) has the ability to learn injector timing performance. Common causes include Faulty Fuel Injector 3, Fuel Injector 3 harness is open or shorted, Fuel Injector 3 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P020C 2014 Chevrolet Silverado indicates Cylinder 3 Injection Timing.
- Common causes
- Common causes include Faulty Fuel Injector 3, Fuel Injector 3 harness is open or shorted, Fuel Injector 3 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P020C 2014 Chevrolet Silverado Description
What are the Possible Causes of the DTC P020C 2014 Chevrolet Silverado?
- Faulty Fuel Injector 3
- Fuel Injector 3 harness is open or shorted
- Fuel Injector 3 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P020C 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P020C 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P020C 2014 Chevrolet Silverado code?
Need more information on how to fix the P020C 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P020C 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P020C 2014 Chevrolet Silverado Code
What does the OBDII code P020C mean for a 2014 Chevrolet Silverado?
P020C indicates an issue with the cylinder 3 fuel injector circuit, specifically related to injection timing. It typically suggests a problem with the electrical signal controlling the injector.
What are the symptoms of code P020C in a 2014 Chevrolet Silverado?
Common symptoms include rough idling, poor engine performance, reduced fuel efficiency, hesitation during acceleration, and potentially an illuminated check engine light.
What causes the P020C code on a 2014 Chevrolet Silverado?
Possible causes include a faulty fuel injector, damaged wiring or connectors in the injector circuit, a failed injector control module, or issues with the powertrain control module (PCM).
Can driving with a P020C code damage my 2014 Chevrolet Silverado?
Yes, prolonged driving with this code can cause further engine damage due to improper fuel delivery, leading to misfires, poor combustion, and increased wear on engine components.
How can I diagnose the P020C code on my 2014 Chevrolet Silverado?
Start by checking the wiring and connectors for cylinder 3’s fuel injector. Use a multimeter to test the injector circuit, and consider inspecting the injector itself or the PCM for faults.
Is it safe to drive with a P020C code present?
While the vehicle might still run, driving with this code can lead to poor performance and potential engine damage. It’s best to address the issue promptly.
How do I fix the P020C code on a 2014 Chevrolet Silverado?
Repairs may include replacing the fuel injector for cylinder 3, repairing damaged wiring or connectors, or replacing the injector control module or PCM if they are faulty.
How much does it cost to fix code P020C on a 2014 Chevrolet Silverado?
Repair costs can vary widely. Replacing a fuel injector typically costs $200-$500, while wiring repairs or PCM replacements may cost more depending on labor rates and parts.
Can the P020C code be caused by dirty fuel injectors?
While P020C is typically related to electrical issues, clogged or dirty fuel injectors can sometimes contribute to injector malfunctions. Cleaning or replacing the injector may help.
Will clearing the P020C code make the problem go away?
Clearing the code may temporarily reset the check engine light, but if the underlying issue isn’t resolved, the code will likely return after the vehicle is driven again.
Discuss the causes and fixes for P020C 2014 Chevrolet Silverado OBDII Code
Code P020C 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.