AutoCodes – Chevrolet – P020B 2014 Chevrolet Silverado

P020B 2014 Chevrolet Silverado Code - Cylinder 2 Injection Timing

Quick Answer

The Engine Control Module (ECM) has the ability to learn injector timing performance. Common causes include Faulty Fuel Injector 2, Fuel Injector 2 harness is open or shorted, Fuel Injector 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P020B 2014 Chevrolet Silverado indicates Cylinder 2 Injection Timing.
Common causes
Common causes include Faulty Fuel Injector 2, Fuel Injector 2 harness is open or shorted, Fuel Injector 2 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 244
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 22, 2024
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P020B 2014 Chevrolet Silverado Description

The Engine Control Module (ECM) has the ability to learn injector timing performance. When the engine is at operating temperature, throttle closed and in deceleration fuel cut-off mode, the ECM will pulse each injector individually and measure the changes in rotational speed of the crankshaft using the input from the crankshaft position sensor. The ECM will run this diagnostic at one fuel rail pressure operating point for each injector. The ECM stores the injector timing value. The Diagnostic Trouble Code (DTC) will be set when the time to build up sufficient current to open the injector is below or above a predetermined threshold.
OBDII Code P020B 2014 Chevrolet Silverado - Cylinder 2 Injection Timing - AutoCodes.com
P020B 2014 Chevrolet Silverado Code - Cylinder 2 Injection Timing

What are the Possible Causes of the DTC P020B 2014 Chevrolet Silverado?

  • Faulty Fuel Injector 2
  • Fuel Injector 2 harness is open or shorted
  • Fuel Injector 2 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P020B 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P020B 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P020B 2014 Chevrolet Silverado code?

Need more information on how to fix the P020B 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P020B 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P020B 2014 Chevrolet Silverado Code

What does the OBDII code P020B mean for a 2014 Chevrolet Silverado?

P020B indicates an issue with the fuel injector timing for cylinder 2, suggesting a malfunction in the injector circuit or related components.

What are common symptoms of the P020B code?

Common symptoms include rough idling, reduced engine performance, misfires, poor fuel economy, and the check engine light turning on.

What causes the P020B code to appear?

Potential causes include a faulty fuel injector, damaged wiring or connectors in the injector circuit, a bad PCM (Powertrain Control Module), or low fuel pressure.

Can I drive my 2014 Chevrolet Silverado with the P020B code?

Driving with the P020B code is not recommended, as it can lead to further engine damage, reduced performance, and unsafe driving conditions.

How do I diagnose the P020B code?

Diagnosis involves using an OBDII scanner to confirm the code, inspecting the wiring and connectors for damage, testing the fuel injector for proper function, and checking the PCM for faults.

How is the P020B code typically fixed?

Repairs may include replacing the faulty fuel injector, repairing damaged wiring or connectors, updating or reprogramming the PCM, or addressing low fuel pressure.

What tools are needed to troubleshoot the P020B code?

Essential tools include an OBDII scanner, a multimeter for testing electrical connections, and possibly a fuel pressure gauge.

Is the P020B code specific to cylinder 2?

Yes, the P020B code specifically refers to an issue with the injection timing for cylinder 2 in the engine.

How much does it cost to repair the P020B code?

Repair costs can vary, typically ranging from $150 to $500 or more, depending on whether the issue is with the fuel injector, wiring, or PCM.

Can a software update fix the P020B code?

In some cases, a PCM software update or reprogramming may resolve the issue, especially if the problem is related to incorrect timing parameters.

Discuss the causes and fixes for P020B 2014 Chevrolet Silverado OBDII Code

Code P020B 2014 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play