AutoCodes – GMC – P020A 2014 GMC Sierra

P020A 2014 GMC Sierra Code - Cylinder 1 Injection Timing

Quick Answer

The Engine Control Module (ECM) has the ability to learn injector timing performance. Common causes include Faulty Fuel Injector 1, Fuel Injector 1 harness is open or shorted, Fuel Injector 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P020A 2014 GMC Sierra indicates Cylinder 1 Injection Timing.
Common causes: Common causes include Faulty Fuel Injector 1, Fuel Injector 1 harness is open or shorted, Fuel Injector 1 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 347

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 22, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P020A 2014 GMC Sierra Description

The Engine Control Module (ECM) has the ability to learn injector timing performance. When the engine is at operating temperature, throttle closed and in deceleration fuel cut-off mode, the ECM will pulse each injector individually and measure the changes in rotational speed of the crankshaft using the input from the crankshaft position sensor. The ECM will run this diagnostic at one fuel rail pressure operating point for each injector. The ECM stores the injector timing value. The Diagnostic Trouble Code (DTC) will be set when the time to build up sufficient current to open the injector is below or above a predetermined threshold.

OBDII Code P020A 2014 GMC Sierra - Cylinder 1 Injection Timing - AutoCodes.com — P020A 2014 GMC Sierra Code - Cylinder 1 Injection Timing

What does this mean?

What are the Possible Causes of the DTC P020A 2014 GMC Sierra?

Faulty Fuel Injector 1
Fuel Injector 1 harness is open or shorted
Fuel Injector 1 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P020A 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P020A 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P020A 2014 GMC Sierra code?

Need more information on how to fix the P020A 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P020A 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P020A 2014 GMC Sierra Code

1. What does the OBDII code P020A indicate on a 2014 GMC Sierra?

The P020A code indicates that there is a problem with the fuel injector timing in Cylinder 1. This could affect the engine's performance as the injector timing is crucial for optimal combustion.

2. What are the common symptoms of code P020A in a 2014 GMC Sierra?

Symptoms include a rough idle, reduced engine performance, increased fuel consumption, and possibly a check engine light. You might also notice occasional stalling or difficulty in starting the vehicle.

3. What causes the P020A code to appear on a 2014 GMC Sierra?

Common causes include a faulty fuel injector, poor electrical connections at the fuel injector, issues with the fuel injector driver within the engine control module (ECM), or a clogged fuel injector.

4. How can I diagnose the P020A code in my 2014 GMC Sierra?

Diagnosis should start with reading the code using an OBDII scanner, followed by a visual inspection of the wiring and connectors to the fuel injector. Testing the fuel injector's resistance with a multimeter and comparing it to specifications can also help diagnose the issue.

5. What are the repair steps for fixing the P020A code on a 2014 GMC Sierra?

Repair steps might include cleaning or replacing the faulty fuel injector, repairing or replacing damaged wiring or connectors, and if necessary, replacing or reprogramming the engine control module.

6. Is it safe to drive my 2014 GMC Sierra with the P020A code?

While you can drive with this code, it is not recommended as it can lead to poorer performance and increased fuel consumption, and over time, potentially more serious engine issues.

7. Can a faulty fuel injector for Cylinder 1 cause other problems in my vehicle?

Yes, a faulty injector can lead to engine misfires, which can cause further damage to the engine and the catalytic converter if not addressed promptly.

8. What tools are needed to diagnose the P020A code on a GMC Sierra?

You will need an OBDII scanner to retrieve the code and a multimeter for testing the injectorâ€™s resistance and electrical connections. In some cases, a fuel pressure gauge might also be necessary.

9. How often do fuel injectors need to be replaced in a 2014 GMC Sierra?

Fuel injectors don't have a specific replacement interval but should be inspected as part of regular maintenance or if you experience engine performance issues.

10. What impact does the P020A code have on the emissions of a 2014 GMC Sierra?

This code can lead to incomplete combustion, which increases the emission of harmful pollutants. Addressing the issue promptly can help maintain the vehicle's emission standards.